Abaco Systems / VMIC VMIVME-2128-001 128-bit High-Voltage Digital Output Board with Built-In-Test
128-bit High-Voltage Digital Output Board with Built-In-Test
- Model
- Abaco Systems / VMIC VMIVME-2128-001
- Calibration
- Available on request
- Price
- $1,599
- RFQ ref
- VMIVME-2128-001
This unit
The Abaco Systems VMIVME-2128-001 is a 128-bit high-voltage digital output board for VMEbus systems. It delivers high-current sink outputs across 128 channels, supporting voltages from 5 to 48 VDC (55 V absolute maximum). Each channel provides 600 mA continuous sink capability with automatic surge current shutdown protection up to 990 mA, thermal shutdown, and inductive flyback protection via output clamp diodes.
Integrated Built-in-Test (BIT) logic enables software-controlled verification of each output channel for rapid fault isolation and system diagnostics, with front panel Fail LED indication. The board addresses four 32-bit longwords, eight 16-bit words, or sixteen 8-bit bytes, supporting 8, 16, and 32-bit data transfers. Positive true logic operation energizes output drivers with logic one inputs.
Optional pull-up resistor configurations accommodate different voltage levels: 270 Ω/5V/6V, 1.5 kΩ/12V/14V, 6.8 kΩ/24V/30V, and 27 kΩ/48V/55V. SIP sockets accept user-supplied warming resistors for applications exceeding 990 mA inrush current. Two 96-pin female connectors (P3 and P4) provide front panel I/O connections with user ground options on P2.
Technical Specifications
- Output Channels: 128 digital outputs
- Output Configuration: High-voltage, high-current sink drivers
- Voltage Range: 5 to 48 VDC (55 V absolute maximum)
- Current Drive: 600 mA per channel sink capability
- Surge Protection: Automatic shutdown at 990 mA surge current limit
- Thermal Protection: Integrated shutdown circuit
- Data Transfer: 8, 16, or 32-bit transfers
- Logic Polarity: Positive true (logic 1 enables driver)
- Power Consumption: Typical 3.0 A at +5 VDC
Key Features
- Built-in-Test logic with software-controlled channel verification
- Inductive flyback protection with output clamp diodes
- Configurable pull-up resistor options for multiple voltage standards
- SIP sockets for inrush current management resistors
- Front panel Fail LED for diagnostic indication
- Addressable in four 32-bit longwords, eight 16-bit words, or sixteen 8-bit bytes
Typical Applications
- Relay drivers
- Lamp drivers
- Solenoid drivers
- Stepper motor control
Compatibility & Integration Full VMEbus compliance (ANSI/IEEE STD 1014-1987, IEC 821 and 297). Compatible with Intelligent I/O Controllers. Address mnemonics: A24:A16:D32/D16/D08 (EO); Slave: 39/3D:29/2D.
Specifications
| Parameter | Value |
|---|---|
| Voltage / Current Range | 5–48 VDC output (55 V max) |
Abaco Systems / VMIC VMIVME-2128-001 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Abaco Systems / VMIC VMIVME-2128-001. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Abaco Systems / VMIC VMIVME-2128-001 price
This Abaco Systems / VMIC VMIVME-2128-001 is listed at $1,599. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Abaco Systems / VMIC VMIVME-2128-001 calibration cost
NIST-traceable calibration for the Abaco Systems / VMIC VMIVME-2128-001 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
