JDS Uniphase T-BERD 6000A/TB6000A
The JDSU/VIAVI T-BERD 6000A is a compact and lightweight test platform for OTN, SONET/SDH, DSn/PDH, Fibre Channel, and Ethernet network testing. It features a large color display, modular design, and supports various testing applications for installation, commissioning, maintenance, and troubleshooting of optical networks.
- Model
- JDS Uniphase TB6000A
- Calibration
- Available on request
- Price
- $760
- Status
- In stock
- RFQ ref
- TB6000A
This unit
The JDS Uniphase T-BERD 6000A (TB6000A) is a modular test platform engineered for network testing across installation, commissioning, maintenance, and troubleshooting phases. It supports OTN, SONET/SDH, DSn/PDH, Fibre Channel, and Ethernet technologies, spanning metro core to long-haul and FTTx deployments. The platform delivers field-ready operation through a large color touchscreen, cloud integration, and remote access capabilities.
Technical Specifications OTN (Optical Transport Network)
Line rates: 2.7 Gbps to 112 Gbps
Full line rate testing of OTU4, OTU3, OTU2, OTU2e, OTU1e, and OTU1
Payload generation and analysis: bulk, SDH/SONET, or Ethernet
Multiplexed payload support: ODU3, ODU2, ODU1, ODU0, ODUflex
OTN Check workflow for payload BERT, GCC BERT, and G.709-compliant round trip delay
ODU-0/ODUFlex for Ethernet/IP client interfaces
Layer 2 and Layer 3 SLA analysis mapped into OTN signals SONET/SDH
Line rates: 1.5 Mbps to 10 Gbps
OC-3/STM-1 through OC-192/STM-64 support
Framing, overhead manipulation/analysis, optical/electrical power level measurement
PRBS generation, SM/PM TTI message Tx/Rx
Service disruption measurements with SD separation/debounce control
Signal label generation/display, frequency offset Tx/Rx, round-trip delay measurement
Embedded SONET/SDH client analysis inside OTN interfaces Ethernet
Line rates: 10 Mbps to 10 Gbps (including 10GE LAN-PHY and WAN-PHY)
Dual-port chassis for two parallel independent tests
Layer 1-4 testing: Ethernet OAM, PBB/PBT, MPLS/VPLS, VLAN, QinQ, IP
Automated RFC 2544 and Y.1564 workflows
RFC 6349 TrueSpeed™ TCP end-to-end performance verification
TCP/UDP layer testing support Fibre Channel
Line rates: 1, 2, 4, 8, and 10 Gbps
Automated FC testing
Key Features
User-friendly touchscreen interface optimized for field deployment
Modular architecture supporting current and future network technologies
Cloud integration and remote access for distributed teams
Data management and reporting capabilities
Typical Applications Optical transport network validation, metro and long-haul deployment testing, access network commissioning, carrier service layer verification, equipment qualification across multiple protocol stacks.
Compatibility & Integration Supports OTN, SONET/SDH, DSn/PDH, Fibre Channel, and Ethernet ecosystems with direct client interface testing through embedded payload analysis.
JDS Uniphase TB6000A — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the JDS Uniphase TB6000A. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
JDS Uniphase TB6000A price
This JDS Uniphase TB6000A is listed at $760. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
JDS Uniphase TB6000A calibration cost
NIST-traceable calibration for the JDS Uniphase TB6000A is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
