Tektronix TDS2024C Oscilloscope, 200 MHz, 4-Channel

The Tektronix TDS2024C is a four-channel digital storage oscilloscope delivering 200 MHz bandwidth and 2 GS/s maximum sample rate for real-time waveform capture across benchtop, educational, and field service environments. Built-in oversampling (10x minimum per channel) ensures signal fidelity, while the 5.7-inch color TFT display and compact 4.4 lb form factor enable flexible deployment. This instrument combines automated measurements, FFT analysis, waveform limit testing, and data logging with straightforward triggering and user-configurable scaling - delivering essential performance without complexity.

Technical Specifications

• Channels: 4 analog


• Bandwidth: 200 MHz


• Sample Rate: 2 GS/s maximum


• Record Length: 2.5k points per channel


• Vertical Sensitivity: 2 mV to 5 V/div


• Vertical Resolution: 8 bits


• DC Vertical Accuracy: ±3%


• Bandwidth Limit: 20 MHz (at 2 mV/div)


• Input Coupling: AC, DC, GND


• Input Impedance: 1 MΩ || 20 pF


• Time Base Range: 5 ns to 50 s/div


• Time Base Accuracy: 50 ppm


• Display: 5.7-inch active TFT color


• Dimensions: 4.9 inches deep


• Weight: 4.4 lb (2 kg)

Key Features

• Automated Measurements: 16 functions including RMS, cursor RMS, duty cycle, delay, and phase


• Trigger Modes: Rising/falling edge, pulse width, video, line-selectable


• FFT Analysis: Real-time frequency-domain capability


• Waveform Limit Testing: Automated pass/fail evaluation


• Data Logging: Extended automated recording


• Autoset & Auto-ranging: Single-button signal acquisition and vertical scaling


• Probe Check Wizard: Built-in verification utility


• Multi-language Interface: Localized user environment

Typical Applications Electronics design verification, embedded systems debugging, educational circuit analysis, field service troubleshooting, and general-purpose signal measurement across analog and digital domains.

Compatibility & Integration

• USB 2.0 Host Port: Front-panel connectivity for keyboards and mass storage


• USB 2.0 Device Port: Rear-panel PC and PictBridge printer interface


• Software: National Instruments LabVIEW SignalExpress TE Limited Edition and Tektronix OpenChoice included


• Probes: Four 200 MHz passive probes (TPP0201, 10x) supplied; compatible with P2220 (200 MHz switchable), P6101B (15 MHz), P6015A (75 MHz), and P5100 (75 MHz) probes