Data I/O UniSite-xpi Programming System
The Data I/O UniSite-xpi is a programming system designed for high-volume manufacturing environments. It supports a wide range of devices, including microcontrollers, memory devices, and programmable logic devices. It offers high-speed programming and reliable performance, making it suitable for demanding production requirements.
- Model
- Data I/O UniSite-xpi
- Calibration
- Available on request
- Price
- $4,200
- Status
- In stock
- RFQ ref
- UniSite-xpi
This unit
The Data I/O UniSite-xpi is a device programmer engineered for high-volume manufacturing and regulated production environments. It programs virtually every device architecture - microcontrollers, memory, CPLDs, FPGAs, anti-fuse devices, and legacy bi-polar/ECL components - with Universal Pin Driver Technology delivering precise signal application to any pin without external adapters. TaskLink™ for Windows software provides job control, device statistics, security audit trails, and process documentation for compliance-critical operations.
Technical Specifications Device Support
Microcontrollers, CPLDs, and FPGAs
High-capacity flash and memory devices
Anti-fuse architectures
Legacy device families (bi-polar, ECL) Package Coverage
Standard 48 DIP packages
Optional PinSite™ module extends support to PLCC, LCC, SOIC, TSOP, TQFP, SSOP, PGA, QFP, BGA, and µBGA Pin Driver Technology
Universal Pin Driver design applies power, signal, or ground to any pin with high precision
Laser-trimmed internal resistor for automatic calibration at power-up Programming Algorithms
Specifications matched to device manufacturer data
Validated on current device samples
Continuously updated library available from Data I/O File Format Support
Over 48 programming formats supported
Manufacturer data formats, custom, and engineering formats Storage & Interface
Mass Storage Module (MSM) standard - boots and operates without floppy disks
High-speed parallel interface and parallel port on XPi models
RS-232C port for serial communication
Electrical Specifications
Operating voltage: 100–240 VAC ± 10%
Frequency: 48–63 Hz
Power consumption: 500 VA max.
Operating humidity: Up to 80% non-condensing
Operational altitude: 15,000 feet
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 48 to 63 Hz | Voltage / Current Range: 100-240 VAC ± 10% |
Data I/O UniSite-xpi — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Data I/O UniSite-xpi. Calibration covers analog input channel accuracy and offset at all gain settings, analog output accuracy, digital I/O logic threshold verification, sample rate and timing accuracy, and trigger and synchronization bus functional verification. NI CompactRIO and PXI chassis also undergo backplane trigger line integrity check.. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Data I/O UniSite-xpi faults: power supply failure (cRIO-9073/9074), C-series slot connector wear, PXI chassis fan failure, GPIB interface failure on VXI controllers, BIOS/EEPROM corruption. NI CompactRIO most common faults are power supply failure on older cRIO-9073/9074 chassis and C-series module slot connector wear from repeated hot-swap cycles. PXI chassis fan failure is the most common wear item — chassis fans are field-replaceable. VXI embedded controllers most commonly develop EEPROM corruption and GPIB interface failure.
Data I/O UniSite-xpi price
This Data I/O UniSite-xpi is listed at $4,200. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Data I/O UniSite-xpi calibration cost
NIST-traceable calibration for the Data I/O UniSite-xpi is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers analog input channel accuracy and offset at all gain settings, analog output accuracy, digital I/O logic threshold verification, sample rate and timing accuracy, and trigger and synchronization bus functional verification. NI CompactRIO and PXI chassis also undergo backplane trigger line integrity check.. Turnaround is 1 to 3 business days after receipt. See full calibration details →
