Abaco Systems / VMIC VMIVME-3413-111 32-Channel Signal Conditioning Board
Abaco Systems / VMIC Signal Conditioning Modules. Frequency Range: DC to 1 kHz, Voltage / Current Range: +5V @ 2.5A typical, 3.0A maximum; ±5mV to ±10V input ranges; 2.5/5/10VDC strain gauge excitation (150mA total); 0.1-10mA RTD excitation.
- Model
- Abaco Systems / VMIC VMIVME-3413-111
- Calibration
- Available on request
- Price
- $1,599
- RFQ ref
- VMIVME-3413-111
This unit
The Abaco Systems/VMIC VMIVME-3413-111 is a 32-channel signal conditioning board for VMEbus systems delivering low-level analog signal acquisition and processing in industrial and data acquisition environments. The board accepts differential, single-ended, or half-bridge inputs directly from transducers and operates as a companion to GE Fanuc Embedded Systems' 64-channel scanning A/D boards, providing galvanic isolation rated at 500VDC between inputs/outputs and the VMEbus.
Technical Specifications
Input Configuration- 32 channels, jumper-configurable as differential, single-ended, or half-bridge (non-inverting)
- Selectable full-scale ranges: ±5mV, ±10mV, ±50mV, ±100mV, ±500mV, ±1V, ±5V, ±10V (availability determined by ordering option)
- Full-scale output: ±5V or ±10V (option-dependent) Signal Conditioning
- Software-programmable gain per channel: x1, x10, x100, x1,000
- Three-pole passive low-pass filters with 10Hz, 100Hz, or 1kHz cutoff options
- Thermocouple cold junction compensation for types E, J, K, N, B, T, R, S with jumper-selectable termination at input connectors or remote location
- Strain gauge bridge excitation: 2.5, 5, or 10VDC (total 150mA capacity) with remote sensing support
- RTD excitation: Individual channels in 8-channel groups, 0.1 to 10mA (adjustable via header resistors), total 32mA Electrical Performance
- Common-mode rejection (CMRR) at DC-60Hz: 120dB (x1,000 gain), 108dB (x100), 96dB (x10), 78dB (x1) referenced to 4-channel group common with 350Ω unbalance, 10Hz filter; 125dB referred to VME power supply common across all gains
- Input noise: Maximum 3σ (R <100Ω) in 10–1,000Hz band
- Power draw: Typical 2.5A at +5VDC; maximum 3.0A with fully loaded bridge excitation
Key Features
- VMEbus 6U double-height form factor with 5VDC power bus connectivity
- Galvanic isolation protects equipment from ground loop interference
- Jumper-configurable input topology and thermocouple CJC termination
- Remote sensing for excitation drive/return lines
Typical Applications Temperature and pressure transducer interfacing, strain gauge measurement systems, RTD-based monitoring, multi-channel low-level analog acquisition in industrial process control and test environments.
Compatibility & Integration Designed for VMEbus systems. Functions as a front-end conditioner paired with GE Fanuc Embedded Systems' 64-channel scanning A/D converters.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | DC to 1 kHz | Voltage / Current Range: '+5V @ 2.5A typical, 3.0A maximum |
Abaco Systems / VMIC VMIVME-3413-111 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Abaco Systems / VMIC VMIVME-3413-111. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Abaco Systems / VMIC VMIVME-3413-111 price
This Abaco Systems / VMIC VMIVME-3413-111 is listed at $1,599. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Abaco Systems / VMIC VMIVME-3413-111 calibration cost
NIST-traceable calibration for the Abaco Systems / VMIC VMIVME-3413-111 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
