Abaco Systems / VMIC VMIVME-5588DMA-410 Enhanced High-Speed DMA Fiber-Optic 1.2 Gbaud Reflective Memory with Interrupts
Abaco Systems / VMIC VME Modules. Frequency Range: 1.2 Gbaud.
- Model
- Abaco Systems / VMIC VMIVME-5588DMA-410
- Calibration
- Available on request
- Price
- $1,599
- RFQ ref
- VMIVME-5588DMA-410
This unit
The Abaco Systems VMIVME-5588DMA-410 is a high-speed DMA fiber-optic reflective memory board for VMEbus systems that enables real-time data sharing across distributed nodes. This single-slot 6U board implements a reflective memory architecture where data written to one node automatically mirrors across all connected nodes, eliminating software overhead and I/O latency. The on-board DMA controller and interrupt support deliver the throughput and responsiveness demanded by data acquisition and processing applications.
Technical Specifications
Reflective Memory Network:- Serial data rate: 1.2 Gbaud
- Maximum node capacity: 256 independent systems
- Data transfer rate: 29.5 Mbyte/s (standard mode) or 14.8 Mbyte/s (redundant transfer mode)
- Fiber-optic reach: 1,000 ft (multimode), 10 km (single-mode), 30 m (twinax cable)
- Redundant transmission error probability: 1.64 × 10⁻²⁰ per transfer cycle
- Any-to-any interrupt generation with single command execution On-Board Memory and DMA:
- Configurable SDRAM: 256 Kbyte to 16 Mbyte
- Direct memory access (DMA) controller with transmit/receive FIFOs
- VMEbus address mapping: A24:A32:D64:D32:D16:D8
Key Features
- Software-transparent data transfer - no processor involvement in network operation
- Zero processor overhead for reflective memory updates
- Error detection with configurable redundant transmission mode
- Transmit and receive FIFO buffering optimizes CPU and bus performance during peak data rates
- Node identification via jumper-selectable address (0–255)
- Optional fiber-optic bypass switches (passive VMIVME-5599 or active VMIVME-5591/-5593)
Typical Applications Real-time distributed data acquisition, multi-node system synchronization, high-speed inter-processor communication, aerospace and defense telemetry systems.
Compatibility & Integration VMEbus single-slot 6U form factor. Supports multimode/single-mode fiber converters for extended range deployment.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 1.2 Gbaud |
Abaco Systems / VMIC VMIVME-5588DMA-410 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Abaco Systems / VMIC VMIVME-5588DMA-410. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Abaco Systems / VMIC VMIVME-5588DMA-410 price
This Abaco Systems / VMIC VMIVME-5588DMA-410 is listed at $1,599. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Abaco Systems / VMIC VMIVME-5588DMA-410 calibration cost
NIST-traceable calibration for the Abaco Systems / VMIC VMIVME-5588DMA-410 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
