Abaco Systems / SBS VMIVME-7050-100000 PowerPC VME Single Board Computer
Abaco Systems / SBS VME Modules. PowerPC VME Single Board Computer.
- Model
- Abaco Systems / SBS VMIVME-7050-100000
- Calibration
- Available on request
- Price
- $8,599
- RFQ ref
- VMIVME-7050-100000
This unit
The Abaco Systems VMIVME-7050-100000 is a PowerPC VME Single Board Computer delivering computing for demanding COTS and OEM applications. Built around an IBM PowerPC 750FX or 750GX processor operating at up to 1.0 GHz with 1 MB on-chip L2 cache, this SBC integrates a Marvell Discovery II system controller capable of 100 Gbps aggregate throughput. The board supports up to 2 GB DDR226 SDRAM with ECC, 64.5 MB bootable Flash, and 32 KB NVRAM for persistent storage and boot operations.
Technical Specifications
Processor & Memory- CPU: IBM PowerPC 750FX or 750GX at up to 1.0 GHz
- L2 Cache: Up to 1 MB on-chip
- SDRAM: Up to 2 GB DDR226 with ECC support
- Flash: 64.5 MB total bootable (PLCC32 socket for 512 KB x8 + 64 MB soldered)
- NVRAM: 32 KB
- SRAM: 2 MB cross-bar fabric switch System Controller
- Marvell Discovery II with 100 Gbps aggregate throughput Expansion
- Two PMC sites, PCI-X capable
- Optional PMC237CM1 expander adds three additional PMC sites (five total across two VMEbus slots)
- 64-bit PCI board-to-board connector Connectivity
- Dual Gigabit Ethernet (10/100/1000 Mbps, IEEE 802.3 with auto-negotiation)
- GMII support with external PHY
- Two multi-protocol serial ports via MV64360 MPSC: RS-232, RS-422/485, synchronous/asynchronous (up to 10 Mbps per channel)
- One front-panel RS-232 debug/remote console port
- Ultra DMA IDE controller with CompactFlash Type 1 socket (up to 1 GB support) VMEbus
- VME64 modes: A32/A24/D32/D16/D08(EO)/MBLT64/BLT32
- DTB Master/Slave, Requester, Interrupt Handler, Interrupter, Arbiter support
Key Features
- Real-time clock
- Software-selectable watchdog timer with reset
- Rear transition boards enable optional CompactFlash access
- Front or rear Gigabit LAN switch connectivity
- Backpressure support for half-duplex operation at 10 or 100 Mbps
Typical Applications Advanced signal processing, real-time embedded systems, test and measurement platforms, military and aerospace computing, industrial process control, and high-availability network appliances.
Compatibility & Integration The VMIVME-7050-100000 fits standard VME64 form factors and supports both master and slave VMEbus modes. All serial ports are accessible via P2 connectors and compatible with transition boards for flexible I/O configuration.
Abaco Systems / SBS VMIVME-7050-100000 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Abaco Systems / SBS VMIVME-7050-100000. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Abaco Systems / SBS VMIVME-7050-100000 price
This Abaco Systems / SBS VMIVME-7050-100000 is listed at $8,599. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Abaco Systems / SBS VMIVME-7050-100000 calibration cost
NIST-traceable calibration for the Abaco Systems / SBS VMIVME-7050-100000 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
