Critical I/O XGE4022-PMC-CC PMC Module
Critical I/O Embedded Test Systems. Model: XGE4022-PMC-CC.
- Model
- Critical I/O XGE4022-PMC-CC
- Calibration
- Available on request
- Price
- $1,450
- Status
- In stock
- RFQ ref
- XGE4022-PMC-CC
This unit
The Critical I/O XGE4022-PMC-CC is a PMC (PCI Mezzanine Card) module that implements a true hardware-based TCP/IP Offload Engine (TOE) for embedded and systems. Unlike processor-based implementations, this module offloads the complete protocol stack
Ethernet, TCP, UDP, IP, iSCSI, and RDMA - into dedicated silicon, delivering sustained high throughput, maximum host offload, ultra-low latency in the microsecond range, and deterministic behavior essential for real-time applications. The dual-port copper configuration provides full-duplex wire-speed operation with up to 250 MBytes/sec per port and 500 MBytes/sec aggregate throughput. Features include zero-copy direct data placement, large send/receive offload, UDP streaming optimization, and hardware built-in test (BIT) for system diagnostics.
Technical Specifications
Ethernet Interfaces: Dual RJ45 ports, 1000Base-T (Gigabit Ethernet)
Throughput: 250 MBytes/sec per port; 500 MBytes/sec dual-port aggregate sustained transfer rate
Latency: Ultra-low latency to microsecond scale
Protocol Offload: Full hardware stack
Ethernet, TCP, UDP, IP, iSCSI, RDMA
Data Path: Zero-copy direct data placement to application memory
Offload Capabilities: Large send/receive offload, UDP streaming, silicon-based stack processing
Built-in Test: Hardware BIT for diagnostics
Architecture: Programmable design with optional protocol customization
Key Features
Full line-rate wire-speed throughput on Gigabit Ethernet ports
Hardware TCP/IP offload eliminates host processor protocol overhead
Deterministic behavior for time-critical operations
100% standard Ethernet compatibility
Dual full-duplex port operation
Typical Applications
Industrial embedded systems requiring deterministic performance
data transfer and network fabric applications
High-throughput UDP streaming
iSCSI and RDMA-based storage and compute acceleration
Real-time systems demanding microsecond-scale latency
Compatibility & Integration The XGE4022-PMC-CC integrates as a standard PCI Mezzanine Card into compatible host systems. The programmable architecture supports optional protocol customization for application-specific requirements.
Critical I/O XGE4022-PMC-CC — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Critical I/O XGE4022-PMC-CC. Calibration covers analog input channel accuracy and offset at all gain settings, analog output accuracy, digital I/O logic threshold verification, sample rate and timing accuracy, and trigger and synchronization bus functional verification. NI CompactRIO and PXI chassis also undergo backplane trigger line integrity check.. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Critical I/O XGE4022-PMC-CC faults: power supply failure (cRIO-9073/9074), C-series slot connector wear, PXI chassis fan failure, GPIB interface failure on VXI controllers, BIOS/EEPROM corruption. NI CompactRIO most common faults are power supply failure on older cRIO-9073/9074 chassis and C-series module slot connector wear from repeated hot-swap cycles. PXI chassis fan failure is the most common wear item — chassis fans are field-replaceable. VXI embedded controllers most commonly develop EEPROM corruption and GPIB interface failure.
Critical I/O XGE4022-PMC-CC price
This Critical I/O XGE4022-PMC-CC is listed at $1,450. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Critical I/O XGE4022-PMC-CC calibration cost
NIST-traceable calibration for the Critical I/O XGE4022-PMC-CC is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers analog input channel accuracy and offset at all gain settings, analog output accuracy, digital I/O logic threshold verification, sample rate and timing accuracy, and trigger and synchronization bus functional verification. NI CompactRIO and PXI chassis also undergo backplane trigger line integrity check.. Turnaround is 1 to 3 business days after receipt. See full calibration details →
