Acromag / Xembedded / Xycom XVME-630 68EC030 Processor Module
Acromag / Xembedded / Xycom Embedded Test Systems. Channels: ** Two asynchronous/synchronous serial channels.
- Model
- Acromag / Xembedded / Xycom XVME-630
- Calibration
- Available on request
- Price
- $750
- Status
- In stock
- RFQ ref
- XVME-630
This unit
The Acromag/Xembedded/Xycom XVME-630 is a VMEbus compatible processor module designed for embedded applications. It features a Motorola 68EC030 microprocessor, offering flexibility in CPU speed and memory configurations. This module is suited for industrial automation, data acquisition, and process control systems requiring solid embedded processing within a VMEbus architecture.
Technical Specifications Processor:
- CPU: Motorola 68EC030
- CPU Speed: Available in 25 MHz or 40 MHz variants
- Math Coprocessor: Site for a 68882 Floating-Point Co-Processor Memory:
- Memory Banks: Three memory banks, each with four sockets
- Bank 1: Supports high-speed SRAM * Maximum capacity: 2 MB SRAM
- Bank 2: Supports EPROM * Maximum capacity: 4 MB EPROM
- Bank 3: Dual-ported to VMEbus; supports SRAM, EPROM, or Flash Memory * Maximum capacity: 4 MB EPROM, 2 MB SRAM, or 1 MB Flash Memory Interfaces:
- Serial Channels: Two asynchronous/synchronous serial channels * Serial Channel A: Dedicated RS-232C port * Serial Channel B: Jumper-configurable for RS-232C or RS-485 * Controller: On-board 68562 Dual Universal Serial Communications Controller (DUSCC)
- Timers: Two 16-bit programmable timers
- VMEbus Interface: * Interrupter: Programmable VMEbus Interrupter * Compliance: VMEbus compatible
- Real-Time Clock: Serial, battery-backed Real-Time Clock with 32 Bytes of battery-backed RAM Physical:
- Form Factor: Single-board, double-high VMEbus module Indicators:
- Front Panel LEDs: Three LEDs for diagnostic PASS/FAIL status and RUN status indication Environmental:
- Operating Temperature: –40 °C to +70 °C (industrial-grade)
Why Choose Aumictech for Acromag / Xembedded / Xycom XVME-630? At Aumictech, we specialize in supplying high-end VMEbus processor modules. Whether you need a reliable 68EC030 CPU for industrial automation, configurable memory options for embedded computing, or solid serial communication for data acquisition, our team ensures the Acromag / Xembedded / Xycom XVME-630 delivers maximum performance for your application.
Acromag / Xembedded / Xycom XVME-630 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Acromag / Xembedded / Xycom XVME-630. Calibration covers analog input channel accuracy and offset at all gain settings, analog output accuracy, digital I/O logic threshold verification, sample rate and timing accuracy, and trigger and synchronization bus functional verification. NI CompactRIO and PXI chassis also undergo backplane trigger line integrity check.. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Acromag / Xembedded / Xycom XVME-630 faults: power supply failure (cRIO-9073/9074), C-series slot connector wear, PXI chassis fan failure, GPIB interface failure on VXI controllers, BIOS/EEPROM corruption. NI CompactRIO most common faults are power supply failure on older cRIO-9073/9074 chassis and C-series module slot connector wear from repeated hot-swap cycles. PXI chassis fan failure is the most common wear item — chassis fans are field-replaceable. VXI embedded controllers most commonly develop EEPROM corruption and GPIB interface failure.
Acromag / Xembedded / Xycom XVME-630 price
This Acromag / Xembedded / Xycom XVME-630 is listed at $750. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Acromag / Xembedded / Xycom XVME-630 calibration cost
NIST-traceable calibration for the Acromag / Xembedded / Xycom XVME-630 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers analog input channel accuracy and offset at all gain settings, analog output accuracy, digital I/O logic threshold verification, sample rate and timing accuracy, and trigger and synchronization bus functional verification. NI CompactRIO and PXI chassis also undergo backplane trigger line integrity check.. Turnaround is 1 to 3 business days after receipt. See full calibration details →
