The Rohde & Schwarz ZVB8 is a 2- or 4-port vector network analyzer operating from 300 kHz to 8 GHz with 50Ω impedance. It delivers dynamic range exceeding 120 dB across most of its operating band and provides output power from +13 dBm to −123 dBm with >50 dB sweep range. The instrument supports parallel measurements via dual-generator architecture, enabling simultaneous excitation of two test ports - critical for efficient multiport and balanced measurements on SAW filters, duplex filters, and antenna switching modules.
Measurement throughput reaches sub-5 microsecond per point performance, while frequency resolution of 1 Hz and measurement bandwidth from 1 Hz to 500 kHz support high-fidelity characterization. Port configurations accommodate 2 to 20,001 measurement points with 0.01 dB output resolution. Compact design and low weight combine with intelligent software to optimize production sequences and handle large measured-data volumes typical of complex RF assessments.
Specifications
Parameter
Value
Frequency Range
300 kHz to 8 GHz | Power Range (dBm): '+13 dBm to −123 dBm
Rohde & Schwarz ZVB8 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Rohde & Schwarz ZVB8.
All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
This Rohde & Schwarz ZVB8 is listed at $5,400. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Rohde & Schwarz ZVB8 calibration cost
NIST-traceable calibration for the Rohde & Schwarz ZVB8 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
