Keithley 2001-SCAN 10-Ch Scanner Card
The Keithley 2001-SCAN is a 10-channel scanner card designed for use with the Keithley 2001 multimeter. It allows users to expand the measurement capabilities of their multimeter by providing the ability to scan up to 10 different input channels. This card is ideal for applications where multiple measurements need to be taken in sequence.
- Model
- Keithley 2001-SCAN
- Calibration
- Available on request
- Price
- $450
- Status
- In stock
- RFQ ref
- 2001-SCAN
This unit
The Keithley 2001-SCAN 10-Channel Scanner Card expands the measurement capabilities of compatible Keithley digital multimeters by enabling automated, multi-point signal acquisition across ten independent channels. Operating as a multiplexer, the card allows sequential scanning and data routing to the host DMM with minimal latency, supporting both 2-pole and 4-pole signal configurations. This approach eliminates the need for external switching hardware and streamlines test procedures requiring repeated measurements across distributed test points.
Technical Specifications Channel Architecture
8 channels with 2-pole relay inputs
2 channels with 2-pole solid-state inputs
All channels configurable for 4-pole operation Relay Input Channels (8)
Maximum DC signal: 110 V DC, 1 A switched, 30 VA (resistive load)
Maximum AC signal: 125 V AC rms or 175 V AC peak, 100 kHz maximum, 1 A switched, 62.5 VA (resistive load)
Contact resistance: 10⁵ operations at maximum signal level; >10⁸ operations cold switching
Contact potential: <±500 nV typical per contact, 1 µV max; <±500 nV typical per contact pair, 1 µV max Solid-State Input Channels (2)
Maximum DC signal: 110 V DC, 1 A switched, 30 VA (resistive load)
Maximum AC signal: 125 V AC rms or 175 V AC peak, 100 kHz maximum, 1 A switched, 62.5 VA (resistive load)
Contact resistance: 10⁵ operations at maximum signal level; >10⁸ operations cold switching Isolation and Voltage Ratings
Isolation between any two terminals: >10⁹ Ω, 10⁹ Ω, <150 pF
Common mode voltage: 350 V peak between any terminal and earth
Maximum voltage between any two terminals: 200 V peak
Key Features
Multiplex one of ten 2-pole signals or one of five 4-pole signals into the DMM
Supports simultaneous 2- or 4-pole signal scanning
Two-channel high-speed multiplexing (Models 2001 and 2002)
Enables high-speed ratio or delta measurements
Screw terminal connectors rated for #22 AWG wire
Physical dimensions: 21 mm H × 72 mm W × 221 mm D
Weight addition: approximately 0.4 kg
Compatibility & Integration Designed for Keithley Model 2001 and Model 2002 digital multimeters. Environmental specifications align with the host instrument.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | DC to 100kHz | Voltage / Current Range: 110V DC (1A switched) |
Keithley 2001-SCAN — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Keithley 2001-SCAN. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Keithley 2001-SCAN price
This Keithley 2001-SCAN is listed at $450. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Keithley 2001-SCAN calibration cost
NIST-traceable calibration for the Keithley 2001-SCAN is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
