Fluke 291-U Arbitrary Waveform Generator and Manager, 100 MS/s, 1 Channel

The Fluke 291-U is a single-channel arbitrary waveform generator delivering 100 MS/s sampling rate and 12-bit vertical resolution for high-fidelity waveform creation and simulation. This instrument combines arbitrary waveform, function, pulse/pulse train, sweep, trigger, tone, and amplitude modulation capabilities in one platform. Waveform management is handled through the included Waveform Manager Plus software for Windows, enabling seamless creation, editing, and storage across front panel, RS-232, USB, and GPIB interfaces.

Technical Specifications

Arbitrary Waveform Generation

• Sampling rate: 100 MS/s


• Vertical resolution: 12 bits


• Maximum arbitrary waveform size: 262,144 points


• Minimum waveform size: 8 points


• Waveform sequencing: Up to 1,024 arbitrary waveforms linkable in sequence with loop counts to 32,768 per waveform and continuous or repeated execution up to 1,048,575 times


• Waveform storage: Up to 500 user-defined waveforms on removable Compact Flash memory cards


• Noise function: 35-bit linear feedback register clocked at 100 MHz Function Generator


• Frequency range: 0.005 Hz to 100 kHz internal; DC to 1 MHz external in tone switching mode


• Square wave output: Up to 50 MHz using DDS techniques Pulse Generation


• Pulse generator: 10 MHz maximum frequency


• Pulse pattern generator: 10 ns resolution Sweep Generator


• Sweep trigger sources: Manual keyboard, external TRIG IN input, or remote interface


• Arbitrary waveforms sweep using DDS techniques with 4,096-point expansion/compression Tone and Modulation


• Frequency list: Up to 16 frequencies from 1 mHz to 40 MHz


• Carrier waveforms: All standard waveforms except pulse, pulse train, and sequence

Key Features

• Waveform definition via front panel editing, RS-232, USB, GPIB download, or direct CF card writing


• Multi-segment complex waveform creation supporting up to 64 segments through output summing


• Built-in trigger generator for synchronization and timing control

Typical Applications Complex waveform testing, signal simulation, frequency sweep characterization, pulse train generation, and amplitude-modulated signal verification.

Compatibility & Integration Waveform Manager Plus software provides Windows-based waveform development and management. Data transfer via RS-232, USB, and GPIB ensures integration with diverse test systems and automated measurement platforms.