Iet Labs Inc 2PRS-F-4-1-2IEEE-2D-RM
IET Labs Inc Calibration Equipment. Accuracy: ** ±(0.05% + 15 mΩ) after zero resistance subtra.
- Model
- IET Labs Inc 2PRS-F-4-1-2IEEE-2D-RM
- Calibration
- Available on request
- Price
- $3,200
- Status
- In stock
- RFQ ref
- 2PRS-F-4-1-2IEEE-2D-RM
This unit
The IET Labs Inc 2PRS-F-4-1-2IEEE-2D-RM is a programmable resistance substitution unit engineered for precision calibration and metrology. It delivers stable, traceable resistance values across a wide range with ±(0.05% + 15 mΩ) accuracy after zero subtraction, meeting stringent IEEE specifications. The instrument combines local front-panel thumbwheel control with remote IEEE-488.2 operation for seamless integration into automated test systems.
Technical Specifications
Resistance Range: 0 to 99,999,999.9 Ω in 0.1 Ω increments
Accuracy: ±(0.05% + 15 mΩ) after zero resistance subtraction, 4-terminal "true-ohm" measurement at 23 °C, SI-traceable
Zero Resistance: <140 mΩ typical <100 mΩ; <25 mΩ with SC (Short Circuit) option; +20 mΩ if OC (Open Circuit) option present
Maximum Load: 3 A or 200 V (dc + ac peak) or 0.5 W/step or 4.5 W maximum (whichever applies first)
Resistance Elements: Low-inductance wirewound resistors hermetically sealed (1 Ω to 100 kΩ); precious metal-oxide film resistors (1 MΩ and above); resistance wire steps below 0.1 Ω
Relay Contacts: Low thermal EMF gold-clad silver-alloy contacts
Power Supply: 110–250 V, 50–60 Hz; 0.5 A fuse (5×20 mm)
Thermal EMF: Low-EMF relays employed; copper wire and copper alloys recommended for connections handling microvolts
Key Features
Four gold-plated tellurium-copper binding posts (HI/LO CURRENT and SENSE pairs) plus chassis GND post
LOCAL/REMOTE front-panel switch for operational mode selection
Hardware or software configurable GPIB addressing (0–30)
Supports *IDN and CAL:DATE? SCPI 1994.0 commands
19" rack-mount configuration; 4.5 kg (10 lb)
Optional OC mode for reproducible break-before-make transitions; optional SC mode for reduced zero resistance
Compatibility & Integration Conforms to IEEE STD 488.2 with 24-pin GPIB connector. Supports IEEE-488.2-1987 and SCPI 1994.0 command sets, enabling direct integration with test automation platforms and instrument control frameworks.
Specifications
| Parameter | Value |
|---|---|
| Voltage / Current Range | 110-250 VAC, 200 V (dc + ac peak) maximum, 3 A maximum load |
IET Labs Inc 2PRS-F-4-1-2IEEE-2D-RM — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the IET Labs Inc 2PRS-F-4-1-2IEEE-2D-RM. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
IET Labs Inc 2PRS-F-4-1-2IEEE-2D-RM price
This IET Labs Inc 2PRS-F-4-1-2IEEE-2D-RM is listed at $3,200. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
IET Labs Inc 2PRS-F-4-1-2IEEE-2D-RM calibration cost
NIST-traceable calibration for the IET Labs Inc 2PRS-F-4-1-2IEEE-2D-RM is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
