Agilent/Keysight 3562A
The Agilent/Keysight 3562A is a dual-channel dynamic signal analyzer used for analyzing frequency response, noise, and vibration. It features a frequency range of DC to 100 kHz, offering high-resolution spectral analysis for a variety of applications. Ideal for electronics testing and mechanical diagnostics.
- Model
- HP 3562A
- Calibration
- Available on request
- Price
- $550
- RFQ ref
- 3562A
This unit
The Agilent/Keysight 3562A is a dual-channel, FFT-based dynamic signal analyzer for time and frequency domain measurement of signals across applications in electronics testing, mechanical diagnostics, and electromechanical control systems. The instrument delivers spectrum, network, and transient analysis with a measurement range of 150 dB and 80 dB dynamic range, supporting frequency analysis from 64 µHz to 100 kHz with zoom resolution to 25.6 µHz.
Technical Specifications
- Frequency Range: 64 µHz to 100 kHz
- Measurement Range: 150 dB
- Dynamic Range: 80 dB
- Frequency Resolution: Up to 25.6 µHz (zoom analysis)
- FFT Resolution: 801 lines (linear)
- Power Input: 86–127 Vac or 196–253 Vac, 48–66 Hz
- Power Consumption: 450 VA maximum
- Dimensions: 426 mm W × 222 mm H × 578 mm D
- Weight: 27 kg net
Key Features
- Spectrum analysis with zoom capabilities for high-resolution spectral measurement
- Network analysis: frequency response magnitude, phase, input/output power spectra
- Transient analysis capturing and analyzing time and frequency domain events
- Waveform digitization, storage, and dual-domain analysis
- AM, FM, and PM demodulation up to 99.9 kHz carrier frequency
- Vector averaging for frequency domain data processing
- Waveform math with block-operation data manipulation
- 40-pole/40-zero curve fitting for modeling and analysis
- Frequency response synthesis
- Built-in signal source: random noise, burst random, sine chirp, burst chirp, fixed sine, swept sine
- HP-IB programmability with auto sequence programming for standalone automation
- Direct hardcopy control via HP-GL plotter interface
- External disk drive control for data and state storage
Typical Applications
- Electronics testing and characterization
- Mechanical vibration and diagnostics
- Electromechanical control system analysis
- Transient event capture and frequency response measurement
Compatibility & Integration Full HP-IB programmability enables integration into automated test systems without external computing. Direct interface with HP-GL plotters for documentation and external storage devices for data management.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 64 µHz to 100 kHz | Voltage / Current Range: ±10 Vpeak (AC + DC) into 10 kΩ load |
HP 3562A — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the HP 3562A. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
HP 3562A price
This HP 3562A is listed at $550. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
HP 3562A calibration cost
NIST-traceable calibration for the HP 3562A is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
