HP / Agilent 3585B Spectrum Analyzer, High Perf 20Hz-40MHz
HP / Agilent Spectrum Analyzers. Frequency range: 20 Hz to 40 MHz, Bandwidth: 3 Hz minimum, Dynamic range: 80–100 dB spurious-free.
- Model
- HP 3585B
- Calibration
- Available on request
- Price
- $4,824
- RFQ ref
- 3585B
This unit
The HP/Agilent 3585B is a spectrum analyzer covering 20 Hz to 40 MHz, engineered for precise baseband signal analysis in voice, video, and digital applications. This instrument delivers 80–100 dB spurious-free dynamic range with amplitude accuracy of ±0.25 dB across a measurement span of −137 dBm to +30 dBm. The 3 Hz minimum resolution bandwidth, combined with selectable 50 Ω, 75 Ω, and 1 MΩ input impedance, enables detailed characterization of low-level signals in complex environments.
Technical Specifications
Frequency range: 20 Hz to 40 MHz
Resolution bandwidth: 3 Hz minimum; selectable 3 Hz to 30 kHz (1, 3, 10 sequence)
Dynamic range: 80–100 dB spurious-free
Amplitude accuracy: ±0.25 dB typical
Measurement range: −137 dBm to +30 dBm
Input impedance: 50 Ω, 75 Ω, 1 MΩ (selectable)
Spurious responses: <−80 dB typical (relative to single signal at or below input range setting)
Noise floor: −85 dBc average (1 kHz bandwidth); −115 dBm typical (3 Hz RBW, −8 dBm signal, 0 dBm input range)
Built-in tracking generator: 50 Ω, 0 to 40 MHz, output −11 dBm to 0 dBm
Frequency counter: 0.1 Hz resolution, 0.3 second measurement time
Display: CRT with panel settings and marker readout
Trace storage: 10 complete measurements in non-volatile registers; two simultaneous traces (1024 × 1001 points)
Power requirements: 115 V (±11%, −25%), 48–440 Hz or 230 V (±11%, −18%), 48–66 Hz
Power consumption: 180 W, 3 A max
Probe power: +15 V dc, −12.6 V dc, 150 mA max
Key Features
Autoranging input attenuator optimizes dynamic range and minimizes distortion
Fully synthesized tuning for CW and swept measurements
Automatic peak search and signal tracking accelerate identification
Automatic limit test evaluates all 1000 measurement points against user limits
Noise level marker displays RMS noise density normalized to 1 Hz bandwidth
Absolute and relative (signal-to-noise) marker functions
Sweep gating option (Option 001) for burst signal analysis
Compatibility & Integration
HP-IB interface (IEEE 488-1978) with direct-plot capability
External display outputs: X, Y at 1 V full deflection; Z from 2.4 V
Compatible with HP active probe family
Probe power: +15 V dc / −12.6 V dc supply available
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 20 Hz to 40 MHz | Power Range (dBm): −137 dBm to +30 dBm | Voltage / Current Range: −18%), −25%), 115 V (±11%, 48–440 Hz or 230 V (±11%, 48–66 Hz |
HP 3585B — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the HP 3585B. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
HP 3585B price
This HP 3585B is listed at $4,823.8. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
HP 3585B calibration cost
NIST-traceable calibration for the HP 3585B is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
