Anritsu 37297C Passive Vector Network Analyzer, 22.5MHz – 65GHz
Anritsu 37297C,Passive vector network analyzer from 22.5 MHz to 65 GHz. Ideal for high-frequency design validation, enabling multi-port S-parameter analysis with fast data acquisition and low trace noise.
- Model
- Anritsu 37297C
- Calibration
- Available on request
- Price
- $28,000
- RFQ ref
- 37297C
This unit
The Anritsu 37297C is a passive vector network analyzer spanning 22.5 MHz to 65 GHz, engineered for high-accuracy S-parameter measurements of passive devices. The instrument integrates a synthesized source, S-parameter test set, and tuned receiver into a single benchtop platform optimized for design validation and production testing.
Technical Specifications
- Frequency Range: 22.5 MHz to 65 GHz
- Measurement Capabilities: S-parameter and passive device measurements
- Data Points: Up to 1601 points or arbitrary N discrete points (2 ≤ N ≤ 1601); CW mode supports single-point selection
- Frequency Resolution: 1 Hz for narrow-band device measurements
- Measurement Update Rate: Less than 2 ms per point with 12-term error-corrected sweeps
- Dynamic Range: Receiver dynamic range specified as ratio of maximum Port 2 signal level to noise floor
Key Features
- Fast 12-term error-corrected sweeps minimize measurement time while maintaining accuracy
- Built-in AutoCal® simplifies calibration workflows
- LRL/LRM calibration and adapter removal calibrations supported
- Six independent markers with delta-reference mode for flexible measurement analysis
- Marker sweep capability between any two frequencies without recalibration
- Two limit lines per trace for automated pass/fail testing with single or segmented thresholds
- Reference delay entry in time or distance; automatic electrical length compensation
- Separate trace memory per channel for post-measurement processing (subtraction, addition, multiplication, division)
Typical Applications
- High-frequency component validation and characterization
- Passive filter, coupler, and transmission line measurements
- RF connector and adapter evaluation
- Design validation across microwave and millimeter-wave frequencies
Compatibility & Integration
- IEEE 488.2 (GPIB) interface for high-speed data transfer and minimized collection times
- Secondary GPIB port for peripheral device control (printers, plotters, power meters, frequency synthesizers)
- Fast error-corrected sweeps combined with GPIB data transfer optimize measurement throughput
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 22.5 MHz to 65 GHz |
Anritsu 37297C — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Anritsu 37297C. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Anritsu 37297C price
This Anritsu 37297C is listed at $28,000. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Anritsu 37297C calibration cost
NIST-traceable calibration for the Anritsu 37297C is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
