DSS Networks 5262-LC Dual Port Ethernet PMC Module
DSS Networks Legacy / Obsolete Test Equipment.
- Model
- DSS Networks 5262-LC
- Calibration
- Available on request
- Price · starting from
- $850
- Status
- In stock
- RFQ ref
- 5262-LC
This unit
The DSS Networks 5262-LC is a dual-port Gigabit Ethernet PMC mezzanine card delivering 1000 Base-X fiber connectivity in a compact IEEE 1386 form factor. Engineered around an Intel Gigabit Ethernet chipset with 64-bit PCI bus mastery, this module sustains 245 MB/sec per port and achieves up to 1,000,000 frames per second at wire speed in full-duplex operation. The card integrates advanced packet processing - including TCP/UDP/IP checksum offload, VLAN support, priority queuing, and silicon-based packet filtering - while maintaining minimal CPU overhead through DMA-driven architecture. The 5262-LC operates across 64-bit PCI buses at 133, 100, or 66 MHz (PCI 2.2 compliant) and sustains 242 MB/sec raw throughput on 64/66 PCI configurations or 118 MB/sec on 32/33 PCI. Dual independent ports support jumbo frames and buffer descriptor-based frame transfer, making it suitable for high-bandwidth embedded networking.
Technical Specifications
Form Factor: IEEE 1386 64-Bit Compact PCI PMC Mezzanine Card
Chipset: Intel Gigabit Ethernet
Ports: Dual, 1000 Base-X fiber (LC connectors)
Port Throughput: 245 MB/sec per port
Total Throughput: 490+ MB/sec (3.92 Gb)
Maximum Frame Rate: 1,000,000 frames/sec
Sustained Raw Throughput: 242 MB/sec (64/66 PCI) or 118 MB/sec (32/33 PCI)
PCI Bus Interface: 64-bit, 133/100/66 MHz, PCI 2.2 Compliant
Power Supply: 1.8 V and 3.3 V design
IEEE Compliance: 802.3 compliant
Key Features
Full-duplex wire-speed operation on both ports
Bus-master DMA engine with maximum PCI bandwidth utilization
Hardware TCP/UDP/IP checksum offload
VLAN and priority queuing support
Advanced silicon-based packet filtering
Jumbo frame capability
Low CPU management overhead
Typical Applications
Digital video transmission and digital imaging
VoIP and packet voice systems
Protocol and media converters
Network switches and edge routers
Security monitoring and network analysis
Test equipment platforms
Military and medical embedded systems
Compatibility & Integration Supported across VxWorks (5.4, 5.5, Tornado II), Linux kernels 2.2–2.4 (including embedded variants), Windows 2000, and Windows XP Embedded. OEM Developer Kit includes sample code, utilities, integration guides, and release notes.
Specifications
| Parameter | Value |
|---|---|
| Voltage / Current Range | 1.8 V, 3.3 V |
DSS Networks 5262-LC — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the DSS Networks 5262-LC. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
DSS Networks 5262-LC price
This DSS Networks 5262-LC is listed at $850. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
DSS Networks 5262-LC calibration cost
NIST-traceable calibration for the DSS Networks 5262-LC is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
