Anrtisu 68075B Synthesized CW Generator, 0.5 – 50.0 GHz
Anrtisu 68075B Synthesized CW Generator, 0.5 – 50.0 GHz,Generates stable continuous wave signals from 0.5 to 50 GHz for RF and microwave testing applications.
- Model
- Anritsu 68075B
- Calibration
- Available on request
- Price
- $42,480
- Status
- In stock
- RFQ ref
- 68075B
This unit
The Anritsu 68075B Synthesized CW Generator delivers stable, precise continuous wave signal generation across 0.5 GHz to 50.0 GHz. Built for RF and microwave test environments, this instrument combines synthesized architecture with ultra-low phase noise and flexible modulation to support demanding component characterization, system integration, and laboratory measurement workflows.
Technical Specifications
- Frequency Range: 0.5 GHz to 50.0 GHz
- Output Power: +17 dBm maximum; −125 dBm minimum
- Phase Noise: −100 dBc SSB at 10 kHz offset from 10 GHz
- Frequency Resolution: 1 kHz standard; 0.1 Hz with Option 11
- Switching Time (Step Sweep): Less than 15 ms + 1 ms/GHz step size, or less than 40 ms (whichever is lower)
- Time Base Stability: Ovenized 10 MHz crystal oscillator available (Option 16)
Key Features
- Modulation: Internal AM, FM, phase modulation, and pulse modulation; supports user-downloaded arbitrary waveforms
- Sweep Modes: CW operation; step sweep with 1 to 10,000 steps; alternate sweep between two independent ranges with separate power settings
- Step Configuration: Dwell time 1 ms to 99 seconds per step; step size from 1 kHz (or 0.1 Hz with Option 11) to full frequency range
- Low Spurious Generation: Designed for clean signal output across the operating range
- Single Coaxial Output: Standard RF output connector
- GPIB Control: IEEE-488 remote programming interface for automation and data transfer
Typical Applications
- Component and subsystem RF characterization
- Receiver and amplifier testing
- System integration and validation
- Local oscillator replacement in measurement systems
Compatibility & Integration Part of the Anritsu 68000B synthesized signal generator family. Related models extend frequency coverage to 65 GHz and beyond; waveguide extensions support measurements to 110 GHz. Rack mounting kits available for ATE and laboratory installations.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 0.5 GHz to 50.0 GHz | Power Range (dBm): '+17 dBm to −125 dBm |
Anritsu 68075B — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Anritsu 68075B. Calibration covers output frequency accuracy, output power level accuracy across the full frequency range, AM/FM/PM/pulse modulation accuracy, harmonic and spurious output levels, and phase noise floor verification. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Anritsu 68075B faults: YIG oscillator failure (no output or loss of lock), step attenuator wear (output drops or steps at set attenuation), ALC loop failure (uncontrolled output power), I/Q modulator assembly failure. HP/Agilent 836xx series most common faults are YIG oscillator failure and step attenuator contact wear causing output steps or drops at specific attenuation settings. Keysight E4428C/E4438C units most commonly develop ALC loop failure and I/Q modulator assembly faults. YIG oscillator replacement and attenuator service are stocked repairs.
Anritsu 68075B price
This Anritsu 68075B is listed at $42,480. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Anritsu 68075B calibration cost
NIST-traceable calibration for the Anritsu 68075B is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers output frequency accuracy, output power level accuracy across the full frequency range, AM/FM/PM/pulse modulation accuracy, harmonic and spurious output levels, and phase noise floor verification. Turnaround is 1 to 3 business days after receipt. See full calibration details →
