Anritsu 69297A Synthesized Signal Generator, 0.01 – 65.0 GHz
Anritsu 69297A Synthesized Signal Generator,Supports 0.01 to 65 GHz signal generation with excellent spectral purity. Perfect for high-frequency testing in microwave systems, satellite communications, and defense electronics.
- Model
- Anritsu 69297A
- Calibration
- Available on request
- Price
- $29,479
- Status
- In stock
- RFQ ref
- 69297A
This unit
The Anritsu 69297A Synthesized Signal Generator delivers signal generation across 0.01 GHz to 65.0 GHz, serving microwave systems, satellite communications, and defense electronics. This instrument combines ultra-low phase noise, flexible modulation, and precise frequency control to support CW stimulus, swept measurements, signal simulation, and component analysis in demanding test environments.
Technical Specifications
Frequency Range: 0.01 GHz to 65.0 GHz Output Power: +17 dBm maximum; −125 dBm minimum Phase Noise: Typical SSB phase noise of −100 dBc/Hz at 10 kHz offset from 10 GHz Frequency Resolution: 1 kHz standard; 0.1 Hz optional (Option 11) Sweep Accuracy: ±30 MHz or ±2 MHz widths (whichever is lesser) for sweep speeds ≤50 MHz/ms; sweep time 30 ms to 99 seconds; sweep width 1 kHz to full range (0.1 Hz to full range with Option 11) Interface: GPIBKey Features
- Internal AM, FM, phase, and pulse modulation
- User-downloadable complex and arbitrary waveforms
- Internal arbitrary waveform generator for AM and FM modulation
- Doublet, triplet, and quadruplet pulse generation for RADAR blind spot testing
- Simultaneous synchronized modulations for complex signal scenarios
- Configurable pulse modulation via external control or internal pulse generator
- CW or step sweep modes with analog, step, manual, and digital sweep capabilities
- Linear or logarithmic sweep selection
- Excellent spurious signal performance
Typical Applications
- High-frequency microwave system testing
- Satellite communication signal generation
- Defense electronics measurement and validation
- Local oscillator replacement
- Network analysis and component characterization
- Automated Test Equipment (ATE) integration
Compatibility & Integration GPIB interface enables remote control and integration into automated measurement systems. Frequency stability references internal or external 10 MHz time base.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 0.01 GHz to 65.0 GHz | Power Range (dBm): '-125 dBm to +17 dBm |
Anritsu 69297A — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Anritsu 69297A. Calibration covers output frequency accuracy, output power level accuracy across the full frequency range, AM/FM/PM/pulse modulation accuracy, harmonic and spurious output levels, and phase noise floor verification. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Anritsu 69297A faults: YIG oscillator failure (no output or loss of lock), step attenuator wear (output drops or steps at set attenuation), ALC loop failure (uncontrolled output power), I/Q modulator assembly failure. HP/Agilent 836xx series most common faults are YIG oscillator failure and step attenuator contact wear causing output steps or drops at specific attenuation settings. Keysight E4428C/E4438C units most commonly develop ALC loop failure and I/Q modulator assembly faults. YIG oscillator replacement and attenuator service are stocked repairs.
Anritsu 69297A price
This Anritsu 69297A is listed at $29,479. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Anritsu 69297A calibration cost
NIST-traceable calibration for the Anritsu 69297A is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers output frequency accuracy, output power level accuracy across the full frequency range, AM/FM/PM/pulse modulation accuracy, harmonic and spurious output levels, and phase noise floor verification. Turnaround is 1 to 3 business days after receipt. See full calibration details →
