Anritsu 69147A Synthesized Sweep Generator, 0.01 – 65.0 GHz
Anritsu 69147A,"Covers 0.01 to 65 GHz with low phase noise and fast sweep capabilities. Ideal for R&D and automated microwave test setups."
- Model
- Anritsu 69147A
- Calibration
- Available on request
- Price
- $35,540
- Status
- In stock
- RFQ ref
- 69147A
This unit
The Anritsu 69147A is a synthesized sweep generator delivering precise signal generation across 0.01 to 65.0 GHz for microwave component characterization, system integration, and RF/microwave test automation. It combines broad frequency coverage with sophisticated sweep architecture, low phase noise, and programmable modulation to support demanding R&D and manufacturing environments.
Technical Specifications
Frequency Performance- Frequency range: 0.01 to 65.0 GHz
- Minimum frequency: 10 MHz
- Frequency resolution: 1 kHz (0.1 Hz with Option 11)
- Step size: 1 kHz to full range (0.1 Hz with Option 11) Output Power & Impedance
- Maximum output power: +13 dBm
- Minimum output power: -15 dBm
- Output accuracy: ±2 dB
- Output impedance: 50 Ohms
- Level switching time: 20 ms typical Phase Noise Performance
- SSB phase noise: -105 dBc/Hz minimum; -66 dBc/Hz maximum
- Ultra-low SSB noise: -100 dBc at 10 kHz offset from 10 GHz Harmonic & Spurious Content
- Harmonics: -40 dBc
- Non-harmonics: -40 dBc
Key Features Modulation Capabilities
- Internal AM, FM, phase modulation, and pulse modulation
- Seven internal waveforms including Gaussian noise
- User-defined arbitrary waveform upload
- Pulse modes: doublet, triplet, quadruplet for RADAR blind-spot testing
- Simultaneous synchronized modulations supported Sweep Modes
- Analog, step, manual, power, and alternate sweep
- Step sweep: 1 to 10,000 steps with 1 ms to 99 second dwell per step
- Alternate sweep between two ranges with independent power levels
- Manual sweep with user-selectable step count or step size
- Programmable frequency agility: up to 1,000 non-sequential stored frequencies
Typical Applications Component and subsystem validation, automated test system integration, RADAR system characterization, microwave filter and amplifier measurement, phase noise and spectral purity assessment.
Compatibility & Integration 50 Ohm output impedance enables direct interface with standard microwave test ports and instrumentation. External level control and internal pulse generator support automated test sequences.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 0.01 to 65.0 GHz | Power Range (dBm): '-15 dBm to +13 dBm |
Anritsu 69147A — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Anritsu 69147A. Calibration covers output frequency accuracy, output power level accuracy across the full frequency range, AM/FM/PM/pulse modulation accuracy, harmonic and spurious output levels, and phase noise floor verification. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Anritsu 69147A faults: YIG oscillator failure (no output or loss of lock), step attenuator wear (output drops or steps at set attenuation), ALC loop failure (uncontrolled output power), I/Q modulator assembly failure. HP/Agilent 836xx series most common faults are YIG oscillator failure and step attenuator contact wear causing output steps or drops at specific attenuation settings. Keysight E4428C/E4438C units most commonly develop ALC loop failure and I/Q modulator assembly faults. YIG oscillator replacement and attenuator service are stocked repairs.
Anritsu 69147A price
This Anritsu 69147A is listed at $35,540. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Anritsu 69147A calibration cost
NIST-traceable calibration for the Anritsu 69147A is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers output frequency accuracy, output power level accuracy across the full frequency range, AM/FM/PM/pulse modulation accuracy, harmonic and spurious output levels, and phase noise floor verification. Turnaround is 1 to 3 business days after receipt. See full calibration details →
