Anritsu 69195A Synthesized Sweep Generator, 0.5 to 65 GHz
Anritsu 69195A Synthesized Sweep Generator,Supports 0.5 to 65 GHz operation with seamless sweep control and clean signal generation. Preferred for RF production environments and signal chain testing.
- Model
- Anritsu 69195A
- Calibration
- Available on request
- Price
- $25,670
- Status
- In stock
- RFQ ref
- 69195A
This unit
The Anritsu 69195A is a synthesized sweep generator delivering phase-locked signal generation from 0.5 GHz to 65 GHz. It combines manual and automated sweep modes with multiple modulation formats, making it suitable for RF component characterization, network analysis integration, and production testing environments. The instrument executes stepped frequency sweeps with phase coherence across the full band, supports complex user-defined modulation, and integrates via GPIB for automated test sequences.
Technical Specifications
Frequency Performance- Frequency range: 0.5 GHz to 65 GHz
- Frequency resolution: 100 kHz minimum in VNA source lock mode
- Sweep width: 1 kHz to full range; 0.1 Hz available with Option 11
- All frequency steps phase-locked throughout sweep range
- Sweep speed: Less than 8.5 ms per step in VNA source lock mode
- Switching time: Less than 15 ms + 1 ms/GHz step size, or less than 40 ms maximum
- Dwell time per step: 1 ms to 99 seconds, user-variable Output Characteristics
- Output power: +10 dBm or maximum leveled output power
- Phase noise: Specified at 10 GHz, 20 GHz, 40 GHz, and 65 GHz carrier frequencies
- Harmonic content: Second harmonic measured at maximum output power Modulation Capability
- Internal modulation: AM, FM, phase, and pulse
- User-downloadable complex modulation supported
- Seven modulating waveforms available
Key Features
- Manual sweep mode with user-selectable step count or step size
- VNA source lock mode for Wiltron 360B Vector Network Analyzer integration
- Step sweep with phase-locked frequency adjustment
- Alternate sweep mode: bi-directional sweeps between two ranges with independent power levels
- Analog frequency sweep with triggering support
- Three trigger modes: auto, external TTL, and single-sweep with reset position selection
- GPIB interface supporting SCPI and native Anritsu command sets
Typical Applications
- Network analyzer source operation under external VNA control
- RF component and subsystem characterization
- Production test automation via GPIB command sequencing
- Modulated signal generation for receiver testing
Compatibility & Integration GPIB connectivity enables direct integration into automated test systems. VNA source lock mode provides phase-coherent operation when controlled by compatible Wiltron 360B analyzers.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 0.5 GHz to 65 GHz | Power Range (dBm): '+10 dBm |
Anritsu 69195A — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Anritsu 69195A. Calibration covers output frequency accuracy, output power level accuracy across the full frequency range, AM/FM/PM/pulse modulation accuracy, harmonic and spurious output levels, and phase noise floor verification. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Anritsu 69195A faults: YIG oscillator failure (no output or loss of lock), step attenuator wear (output drops or steps at set attenuation), ALC loop failure (uncontrolled output power), I/Q modulator assembly failure. HP/Agilent 836xx series most common faults are YIG oscillator failure and step attenuator contact wear causing output steps or drops at specific attenuation settings. Keysight E4428C/E4438C units most commonly develop ALC loop failure and I/Q modulator assembly faults. YIG oscillator replacement and attenuator service are stocked repairs.
Anritsu 69195A price
This Anritsu 69195A is listed at $25,670. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Anritsu 69195A calibration cost
NIST-traceable calibration for the Anritsu 69195A is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers output frequency accuracy, output power level accuracy across the full frequency range, AM/FM/PM/pulse modulation accuracy, harmonic and spurious output levels, and phase noise floor verification. Turnaround is 1 to 3 business days after receipt. See full calibration details →
