Keithley 7011-C Quad 1x10 Mux Switch Card
The Keithley 7011-C is a quad 1x10 multiplexer switch card designed for use with Keithley switching systems. It provides versatile signal routing capabilities for automated testing and data acquisition applications. This card features four independent 1x10 multiplexer channels, each capable of switching one input signal to any one of ten output channels.
- Model
- Keithley 7011-C
- Calibration
- Available on request
- Price
- $325
- Status
- In stock
- RFQ ref
- 7011-C
This unit
The Keithley 7011-C is a Quad 1x10 Mux Switch Card engineered for signal routing in automated test and data acquisition systems. It integrates with Keithley's 7001 and 7002 switch mainframes to deliver configurable multiplexing across four independent 1x10 2-pole banks. Banks combine flexibly into dual 1x20, 1x10 and 1x30, or single 1x40 multiplexer topologies. Two 7011-C cards cascade to form a 1x80 multiplexer, while outputs connect to 7012 row-expansion cards via the analog backplane. Removable jumpers enable bank isolation and backplane connectivity.
Technical Specifications Switching Performance
Maximum DC signal: 110 V between any two pins, 1 A switched, 30 VA (resistive load)
Maximum AC signal: 125 V rms, 175 V AC peak between any two pins, 1 A switched, 60 VA (resistive load)
Common mode voltage: 175 V peak (any pin to chassis)
Channel resistance: <1 Ω per conductor
Contact potential: <1 µV per channel contact pair
Offset current: 10⁹ Ω, 10⁹ Ω, 10⁹ Ω, 10⁹ Ω, 10⁹ Ω, 10⁹ Ω, <600 pF
Crosstalk at 1 MHz (50 Ω load): <–40 dB (bank and channel)
Insertion loss (50 Ω source/load): <0.1 dB below 1 MHz, <3 dB below 2 MHz Contact Life
Cold switching: 10⁸ closures
At maximum signal levels: 10⁵ closures
Key Features
Four independent 2-pole multiplexer banks
Flexible configuration from 1x10 to 1x40 topologies
Cascadable for 1x80 multiplexer expansion
Low contact potential and offset current for sensitive measurements
96-pin male DIN connector interface
Typical Applications
Automated test equipment (ATE)
Multi-channel data acquisition
Signal routing in laboratory environments
Low-level analog switching
Compatibility & Integration Designed for Keithley 7001 and 7002 Switch Mainframes. Backplane outputs support row expansion via 7012 cards. Jumper-selectable bank isolation.
Specifications
| Parameter | Value |
|---|---|
| Voltage / Current Range | 0.5 A switched current, 300 VDC or 250 VAC |
Keithley 7011-C — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Keithley 7011-C. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Keithley 7011-C price
This Keithley 7011-C is listed at $325. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Keithley 7011-C calibration cost
NIST-traceable calibration for the Keithley 7011-C is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
