Agilent/Keysight 70301A – Microwave Tracking Generator (for 70000 series, up to 18 GHz)
The Agilent/Keysight 70301A is a precision instrument designed for accurate signal analysis and measurement. Featuring a wide frequency range and advanced signal processing capabilities, it ensures reliable performance in various testing scenarios. Its user-friendly interface and solid design make it suitable for both laboratory and field applications.
- Model
- Agilent / Keysight 70301A
- Calibration
- Available on request
- Price
- $1,289
- Status
- In stock
- RFQ ref
- 70301A
This unit
The Agilent/Keysight 70301A is a microwave tracking generator module that adds stimulus-response measurement capability to Keysight 70000 series spectrum analyzers. Operating from 2.7 GHz to 18 GHz, it enables simultaneous signal generation and analysis for precise characterization of component gain, frequency response, isolation, and return loss. The module integrates directly into the 70000 series modular measurement system, delivering dynamic range exceeding 130 dB when paired with compatible analyzers.
Technical Specifications
- Frequency Range: 2.7 GHz to 18 GHz
- Output Power (Maximum Leveled): -2 dBm typical; 0 dBm at 20–30°C
- Amplitude Control Range: +14.5 dBm to -66 dBm
- Dynamic Range: > 130 dB (with 71210C spectrum analyzer)
- Resolution Bandwidth: As narrow as 10 Hz
- Frequency Accuracy: ±[(frequency × reference 1) + 1% span + 15 Hz] for ≤ 10 MHz synthesized span
- Frequency Tracking Drift: < 3 Hz/hr
- Tracking Adjust Range: ±500 Hz in 1 Hz steps
- Frequency Offset Range: ±5 MHz with external 21.4 MHz
- Output Attenuator Range: 70 dB in 10 dB steps
- Output Attenuator Repeatability: < ±0.2 dB per setting
- Amplitude Modulation: 0–100% depth; 20 Hz to 20 kHz rate
- Noise Sidebands (10 kHz offset): < -105 dBc/Hz @ -10 dBm
- Harmonic Spurious Content: < -25 dBc (20 Hz–10 MHz)
- RF Off Residuals
Tracking: < -120 dBm; Non-tracking: < -80 dBm
Key Features
- Two-slot MMS module architecture
- Tight frequency tracking with sub-3 Hz/hr drift specification
- Fine-resolution 1 Hz tracking adjustment capability
- Repeatable attenuator control within ±0.2 dB across 70 dB range
- Low spectral noise sidebands for clean stimulus signal
Typical Applications
- Scalar network analysis and component characterization
- Filter and amplifier gain/phase response measurements
- Port isolation and return loss evaluation
- Systems requiring concurrent stimulus generation and spectral analysis
Compatibility & Integration Designed for the Keysight 70000 Series Modular Measurement System. Compatible with 71210A and 71210C microwave spectrum analyzers. Controlled via Keysight 70871A scalar personality. Operating temperature range: 0 to 55°C. Module dimensions: 127 mm H × 96 mm W × 467 mm L; weight 5.0 kg.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 2.7 GHz to 18 GHz | Power Range (dBm): −70 dBm to +10 dBm |
Agilent / Keysight 70301A — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Agilent / Keysight 70301A. Calibration covers output frequency accuracy, output power level accuracy across the full frequency range, AM/FM/PM/pulse modulation accuracy, harmonic and spurious output levels, and phase noise floor verification. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Agilent / Keysight 70301A faults: YIG oscillator failure (no output or loss of lock), step attenuator wear (output drops or steps at set attenuation), ALC loop failure (uncontrolled output power), I/Q modulator assembly failure. HP/Agilent 836xx series most common faults are YIG oscillator failure and step attenuator contact wear causing output steps or drops at specific attenuation settings. Keysight E4428C/E4438C units most commonly develop ALC loop failure and I/Q modulator assembly faults. YIG oscillator replacement and attenuator service are stocked repairs.
Agilent / Keysight 70301A price
This Agilent / Keysight 70301A is listed at $1,289. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Agilent / Keysight 70301A calibration cost
NIST-traceable calibration for the Agilent / Keysight 70301A is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers output frequency accuracy, output power level accuracy across the full frequency range, AM/FM/PM/pulse modulation accuracy, harmonic and spurious output levels, and phase noise floor verification. Turnaround is 1 to 3 business days after receipt. See full calibration details →