Fluke 80TK
The Fluke 80TK Thermocouple Module converts a DMM to a thermometer. Selectable °C or °F. For use with any temperature-measuring DMM. Measurement Range: -50 to +350 °C (-58 to +662 °F).
- Model
- Fluke 80TK
- Calibration
- Available on request
- Price
- $110
- RFQ ref
- 80TK
This unit
The Fluke 80TK Thermocouple Module transforms any compatible digital multimeter into a precision thermometer for Type-K thermocouple measurements. It converts thermocouple millivolt output to direct temperature readings at a 1 mV per degree Celsius or Fahrenheit ratio, enabling temperature monitoring across -50 to 1000 °C (-58 to 1832 °F) with selectable scale output. The module accepts standard mini-thermocouple connectors and bare wire leads, operating from a single 9V battery with approximately 1600+ hours of operational life.
Technical Specifications
Measurement Range: -50 to 1000 °C (-58 to 1832 °F), probe dependent
Temperature Scales: Selectable °C or °F via three-position switch
Output Conversion: 1 mV per degree Celsius or Fahrenheit
Input Connector: Standard mini-thermocouple connectors or bare wire leads
Maximum Input Voltage: 60 V DC / 24 V AC at thermocouple input
Power: Standard 9V battery (NEDA #1604, 6F22, 006P); 1600+ hours runtime
Resolution: Dependent on DMM count (0.1 °C/F in lower mV/V ranges; 1.0 °C/F in higher ranges)
Basic Accuracy: 0.5% of reading ± 2 °C (-20 to 350 °C); 1.75% of reading ± 2 °C (351 to 500 °C); 2.0% of reading ± 2 °C (501 to 1000 °C); 2.5% of reading ± 2 °C typical (-50 to -21 °C)
Temperature Coefficient: Multiply basic accuracy by 0.1 for each degree ambient temperature above 28 °C or below 18 °C (0 to 50 °C range)
Key Features
Direct temperature display in °C or °F with user-selectable output
Extended measurement range suitable for industrial and laboratory thermal monitoring
Flexible probe connectivity supporting both connectorized and bare wire configurations
Long battery life reduces replacement frequency in field applications
Low-voltage design with defined input voltage limits
Compatibility & Integration The 80TK operates with any digital multimeter featuring 10 MΩ or greater input impedance and a millivolt DC measurement scale. This broad compatibility enables integration into existing test setups without requiring dedicated instrumentation.
Specifications
| Parameter | Value |
|---|---|
| Voltage / Current Range | 60 V DC / 24 V AC (maximum at thermocouple input) |
Fluke 80TK — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Fluke 80TK. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Fluke 80TK price
This Fluke 80TK is listed at $110. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Fluke 80TK calibration cost
NIST-traceable calibration for the Fluke 80TK is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
