Agilent / Keysight 86290B RF plug-in
Agilent / Keysight RF Signal Sources. Frequency Range: 2.0 GHz to 18.6 GHz, Power Range (dBm): +10 dBm.
- Model
- Agilent / Keysight 86290B
- Calibration
- Available on request
- Price
- $482
- Status
- In stock
- RFQ ref
- 86290B
This unit
The Agilent/Keysight 86290B is an RF plug-in module for the 8620C mainframe that delivers signal generation across 2.0 to 18.6 GHz. It combines a YIG Tuned Oscillator (2.0–6.2 GHz) with a YIG Tuned Multiplier (6.0–18.6 GHz) to provide continuous or band-selectable RF output at +10 dBm. The module supports flexible leveling via internal, external crystal, or power meter modes and includes a YTO test signal outlet on the rear panel.
Sweep performance spans 10 msec for single bands and 60 msec across the full 2.0–18.6 GHz range.
Technical Specifications
- Frequency Range: 2.0 GHz to 18.6 GHz (continuous Band 4) or selectable Band 1 (2.0–6.2 GHz), Band 2 (6.0–12.4 GHz), Band 3 (12.0–18.6 GHz)
- Output Power: +10 dBm across 2.0–18.6 GHz
- Power Level Control Range: 10 dBm
- Sweep Time: 10 msec (single bands); 60 msec (2.0–18.6 GHz continuous)
- RF Output Connector: Type-N standard; APC-7 available (Option 005)
- Auxiliary Output: YTO test signal at rear panel AUX OUT connector (typically −10 dBm)
Key Features
- Dual-oscillator architecture: YIG Tuned Oscillator for lower frequencies, YIG Tuned Multiplier for upper bands
- Automatic Level Control with selectable internal, external crystal, or power meter leveling
- Rear panel RF output option (Option 004)
- Multi-band or continuous frequency selection
Typical Applications
- Component and subsystem RF testing
- Scalar network analysis
- RF system characterization
- Local oscillator for down-conversion of high-frequency signals
- Stand-alone RF signal source operation
Compatibility & Integration
- Plug-in module for Agilent/Keysight 8620C Mainframe
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 2.0 GHz to 18.6 GHz | Power Range (dBm): '+10 dBm |
Agilent / Keysight 86290B — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Agilent / Keysight 86290B. Calibration covers output frequency accuracy, output power level accuracy across the full frequency range, AM/FM/PM/pulse modulation accuracy, harmonic and spurious output levels, and phase noise floor verification. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Agilent / Keysight 86290B faults: YIG oscillator failure (no output or loss of lock), step attenuator wear (output drops or steps at set attenuation), ALC loop failure (uncontrolled output power), I/Q modulator assembly failure. HP/Agilent 836xx series most common faults are YIG oscillator failure and step attenuator contact wear causing output steps or drops at specific attenuation settings. Keysight E4428C/E4438C units most commonly develop ALC loop failure and I/Q modulator assembly faults. YIG oscillator replacement and attenuator service are stocked repairs.
Agilent / Keysight 86290B price
This Agilent / Keysight 86290B is listed at $482.2. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Agilent / Keysight 86290B calibration cost
NIST-traceable calibration for the Agilent / Keysight 86290B is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers output frequency accuracy, output power level accuracy across the full frequency range, AM/FM/PM/pulse modulation accuracy, harmonic and spurious output levels, and phase noise floor verification. Turnaround is 1 to 3 business days after receipt. See full calibration details →
