Anritsu 69167B Synthesized Sweep/Signal Generator 10 MHz – 40 GHz
Anritsu 69167B,"Synthesized signal generator with 10 MHz to 40 GHz range. Supports AM, FM, and pulse modulation for RF design and verification."
- Model
- Anritsu 69167B
- Calibration
- Available on request
- Price
- $10,500
- Status
- In stock
- RFQ ref
- 69167B
This unit
The Anritsu 69167B is a microprocessor-based synthesized sweep/signal generator spanning 0.01 to 40 GHz, engineered for RF design verification and complex signal simulation. It delivers phase-locked CW generation, broad and narrow-band sweeps, and multiple modulation modes including AM, FM, pulse, phase, and scan modulation. Front-panel and remote GPIB control via IEEE-488 provide full operational flexibility, while downloadable complex modulation and seven internal waveforms expand signal generation capabilities.
Technical Specifications
Frequency Coverage: 0.01 to 40 GHz with 100.0 mHz resolution (0.1 Hz with Option 11). Output Power: +13 dBm to -15 dBm typical; -120 dBm achievable with optional attenuator. Switching time below 5 ms for steps under 100 MHz; typically under 15 ms plus 1 ms per GHz step size or 40 ms maximum. Phase Noise: Ultra-low SSB phase noise at -107 dBc measured 10 kHz offset from 10 GHz. Output Impedance: 50 Ω (typical). Sweep Accuracy: ±30 MHz or ±2 MHz widths (whichever is lesser) at sweep speeds ≤50 MHz/ms.Key Features
- Digital frequency and power sweep with step counts from 1 to 10,000
- Step sizes from 1 kHz to full range; dwell time 1 ms to 99 seconds per step
- Alternate sweep mode between two frequency/power ranges
- List sweep mode: 4 tables, 2000 non-sequential frequency/power sets, GPIB-addressable
- Manual sweep mode for phase-locked stepped frequency adjustment
- Swept Delay feature for moving target simulation
- Modulation inputs/outputs via front- or rear-panel BNC connectors
- SCPI programmability with Option 19
Modulation Capabilities AM (linear, log), FM, pulse, phase, and scan modulation. Internal generators supply seven waveforms including Gaussian noise. User-downloadable complex modulation supported.
Compatibility & Integration IEEE-488 GPIB interface enables remote command and control. Optional 2C/2D 90 dB step attenuator and Optional 2E 120 dB electronic step attenuator extend dynamic range. Single 13.3 cm package footprint minimizes rack space.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 0.01 to 40 GHz | Power Range (dBm): '+13 dBm to -15 dBm typical (−120 dBm with optional attenuator) |
Anritsu 69167B — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Anritsu 69167B. Calibration covers output frequency accuracy, output power level accuracy across the full frequency range, AM/FM/PM/pulse modulation accuracy, harmonic and spurious output levels, and phase noise floor verification. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Anritsu 69167B faults: YIG oscillator failure (no output or loss of lock), step attenuator wear (output drops or steps at set attenuation), ALC loop failure (uncontrolled output power), I/Q modulator assembly failure. HP/Agilent 836xx series most common faults are YIG oscillator failure and step attenuator contact wear causing output steps or drops at specific attenuation settings. Keysight E4428C/E4438C units most commonly develop ALC loop failure and I/Q modulator assembly faults. YIG oscillator replacement and attenuator service are stocked repairs.
Anritsu 69167B price
This Anritsu 69167B is listed at $10,500. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Anritsu 69167B calibration cost
NIST-traceable calibration for the Anritsu 69167B is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers output frequency accuracy, output power level accuracy across the full frequency range, AM/FM/PM/pulse modulation accuracy, harmonic and spurious output levels, and phase noise floor verification. Turnaround is 1 to 3 business days after receipt. See full calibration details →
