Curtiss-Wright / Systran SCRAMNet AHSB-DPCIG04M-T PCI Module
The Curtiss-Wright/Systran SCRAMNet AHSB-DPCIG04M-T is a PCI module designed for real-time data sharing in demanding industrial applications. It facilitates rapid communication between multiple nodes, ensuring data consistency and minimal latency. Ideal for simulation, test and measurement, and control systems.
- Model
- Curtiss-Wright / Systran AHSB-DPCIG04M-T
- Calibration
- Available on request
- Price
- $1,850
- Status
- In stock
- RFQ ref
- AHSB-DPCIG04M-T
This unit
The Curtiss-Wright/Systran SCRAMNet AHSB-DPCIG04M-T is a PCI module engineered for deterministic, low-latency inter-node communication in distributed real-time systems. It implements a replicated shared-memory architecture that enables multiple nodes to access and update data simultaneously with minimal overhead. The module delivers up to 16.7 MB/sec throughput and guarantees deterministic performance through a register insertion media access protocol that eliminates data collisions. Transport delay is 250 nSec per node, with node latency ranging from 250 nSec to 800 nSec for 4-byte packets and 250 nSec to 1.5 µSec for 16-byte packets.
Technical Specifications
Data Throughput: Up to 16.7 MB/sec (packet-size dependent)
Transport Delay: 250 nSec per node
Node Latency: 250 nSec–800 nSec (4-byte packets); 250 nSec–1.5 µSec (16-byte packets)
On-Board Memory: Up to 8 MB replicated shared-memory via high-speed SRAM SIMM modules
Bus Interface: PCI Local Bus Specification Rev. 2.1
ASIC Core: Handles message reception, transmission arbitration, network control, memory management, interrupt handling, error detection and correction
Operating Temperature: 0°C to 40°C
Key Features
Fiber optic connectivity: 820 nm (300 m max) and 1300 nm (3500 m max) interfaces with ST connectors on 62.5/125 micron multi-mode cable
Coaxial connectivity: RG-58U 50 ohm cable with SMA connectors up to 30 m
Shared-memory controller provides transparent interprocessor communication, reducing network I/O overhead
V3 Semiconductor V363EPC PCI Bridge chipset
Short-length adapter board designed for installation in the last PCI slot
Typical Applications Simulation and distributed test environments, real-time measurement and control systems, applications requiring deterministic inter-node synchronization.
Compatibility & Integration Backwards compatible with SCRAMNet+ and SCRAMNet Classic products (except GOLD RING protocol). Supports multiple backplane architectures including PCI, VME, ISA, EISA, PMC, SBus, GIO-32, and CompactPCI.
Specifications
| Parameter | Value |
|---|---|
| Wavelength Range | 1300 nm, 820 nm |
Curtiss-Wright / Systran AHSB-DPCIG04M-T — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Curtiss-Wright / Systran AHSB-DPCIG04M-T. Calibration covers analog input channel accuracy and offset at all gain settings, analog output accuracy, digital I/O logic threshold verification, sample rate and timing accuracy, and trigger and synchronization bus functional verification. NI CompactRIO and PXI chassis also undergo backplane trigger line integrity check.. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Curtiss-Wright / Systran AHSB-DPCIG04M-T faults: power supply failure (cRIO-9073/9074), C-series slot connector wear, PXI chassis fan failure, GPIB interface failure on VXI controllers, BIOS/EEPROM corruption. NI CompactRIO most common faults are power supply failure on older cRIO-9073/9074 chassis and C-series module slot connector wear from repeated hot-swap cycles. PXI chassis fan failure is the most common wear item — chassis fans are field-replaceable. VXI embedded controllers most commonly develop EEPROM corruption and GPIB interface failure.
Curtiss-Wright / Systran AHSB-DPCIG04M-T price
This Curtiss-Wright / Systran AHSB-DPCIG04M-T is listed at $1,850. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Curtiss-Wright / Systran AHSB-DPCIG04M-T calibration cost
NIST-traceable calibration for the Curtiss-Wright / Systran AHSB-DPCIG04M-T is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers analog input channel accuracy and offset at all gain settings, analog output accuracy, digital I/O logic threshold verification, sample rate and timing accuracy, and trigger and synchronization bus functional verification. NI CompactRIO and PXI chassis also undergo backplane trigger line integrity check.. Turnaround is 1 to 3 business days after receipt. See full calibration details →
