TriBrer AOF210 Optical LASER
TriBrer Optical Light Sources. Model: AOF210.
- Model
- TriBrer AOF210
- Calibration
- Available on request
- Price
- $130
- Status
- In stock
- RFQ ref
- AOF210
This unit
The TriBrer AOF210 is an optical laser source engineered for fiber optic network installation, maintenance, and fault diagnosis. It delivers stable laser signals across multiple configurable wavelengths and integrates with optical power meters to measure attenuation, verify continuity, and assess transmission quality in singlemode and multimode fiber links.
Technical Specifications
Physical & Operating Parameters:- Dimensions: 170 mm (H) × 97 mm (W) × 38 mm (D)
- Weight: 380 g
- Operating temperature: −10°C to +50°C, relative humidity < 90%
- Storage temperature: −20°C to +60°C, relative humidity 16 hours continuous operation
- Power options: Three AA batteries or AC/DC adapter
- Auto power-off: Configurable (default 10 minutes inactivity); triggered by low battery Optical Output:
- Wavelengths: 850 nm, 1300 nm (multimode); 1310 nm, 1490 nm, 1550 nm, 1625 nm (singlemode); Visual Fault Locator options at 1 mW or 10 mW
- Output power: > −6 dBm @ 1310 nm, 1490 nm, 1550 nm, 1625 nm; > −10 dBm @ 850 nm, 1300 nm
- Stability: ±0.05 dB per hour, ±0.1 dB per 8 hours (after 5 minute warm-up at 20±3°C, CW mode, FC connector with optical isolator)
- Modulation modes: Continuous Wave (CW), 270 Hz, 1 kHz, 2 kHz
- Built-in optical isolator for enhanced signal stability
Key Features
- Color LCD display
- Wavelength disable function allows selective deactivation of unused wavelengths
- Auto Wavelength Shifting with Wave ID synchronizes automatically with TriBrer OPM AOP110 power meter (9 second intervals)
- Optional Visual Fault Locator module with CW and GLINT modes
- FC/PC connectors standard; customization available
- Battery charging support with low-battery indication
Typical Applications
- Multimode and singlemode fiber continuity verification
- Optical attenuation measurement and loss budgeting
- Fiber link transmission quality assessment
- Visual fault location in cable routes
Compatibility & Integration Designed for paired operation with the TriBrer OPM AOP110 optical power meter via automatic wavelength synchronization. Optional FC-to-LC and SC-to-LC adapters available for non-standard connector configurations. Supplied with carrying bag, calibration certificate, and user manual.
Specifications
| Parameter | Value |
|---|---|
| Power Range (dBm) | > −6 dBm @ 1310 nm, 1300 nm, 1490 nm, 1550 nm, 1625 nm |
| > −10 dBm @ 850 nm | Voltage / Current Range | Three AA batteries or AC/DC power adapter | Wavelength Range: 1300 nm, 1310 nm, 1490 nm, 1550 nm, 1625 nm |
TriBrer AOF210 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the TriBrer AOF210. Calibration covers output power at specified wavelengths, wavelength accuracy, 15-minute output stability, and modulation frequency accuracy where applicable. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common TriBrer AOF210 faults: laser diode end-of-life (output below spec), fiber output connector damage, output instability. Common repairs include laser diode replacement when output falls below spec, fiber output connector repair, and thermal management service.
TriBrer AOF210 price
This TriBrer AOF210 is listed at $130. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
TriBrer AOF210 calibration cost
NIST-traceable calibration for the TriBrer AOF210 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers output power at specified wavelengths, wavelength accuracy, 15-minute output stability, and modulation frequency accuracy where applicable. Turnaround is 1 to 3 business days after receipt. See full calibration details →
