DDC BU-65569T1-300 MIL-STD-1553 CompactPCI Card
DDC Embedded Test Systems. Channels: One dual redundant channel (BU-65569TX series supp.
- Model
- DDC BU-65569T1-300
- Calibration
- Available on request
- Price
- $2,600
- Status
- In stock
- RFQ ref
- BU-65569T1-300
This unit
The DDC BU-65569T1-300 is a 32-bit/33 MHz CompactPCI card that provides dual redundant MIL-STD-1553 data bus communication for aerospace, defense, and industrial applications. Built on the Enhanced Mini-ACE architecture, this fully compliant PCI target agent operates at up to 33 MHz and supports 3.3 V or 5 V signaling, delivering independent programming of Bus Controller, Remote Terminal, Monitor, or combined RT/Monitor modes on each channel.
Technical Specifications
PCI Interface: 32-bit/33 MHz CompactPCI, fully compliant target agent per PCI Local Bus Specification Revision 2.2
Signaling: 3.3 V or 5 V environments supported
MIL-STD-1553 Channels: One dual redundant channel (BU-65569TX series supports up to four dual redundant channels)
Memory: 64K words of RAM per channel
Data Bus Coupling: Transformer or direct coupled 1553 channels
Power Supply: +3.3 V (logic), +5 V (RAM and transceiver)
Operating Temperature: 0°C to +55°C, convection-cooled
Connector: TE Connectivity/AMP 749080-1 shielded backshell kit, front panel I/O
Key Features
Enhanced Mini-ACE BC/RT/MT architecture with highly autonomous Bus Controller design
Selectable channel configuration for each 1553 interface
RT buffering options and selective message monitoring
PCI interrupt support
Front panel connector configuration with signal routing capability
Software Support
VxWorks driver
Linux driver and support
Windows 95/98/2000/XP and Windows NT drivers with C library
DataSIMS software compatibility
BusTrACEr for Windows
Typical Applications Aerospace platform avionics, military vehicle integration, defense command and control systems, and industrial automation requiring MIL-STD-1553 bus backbone.
Specifications
| Parameter | Value |
|---|---|
| Voltage / Current Range | '+3.3V, +5V |
DDC BU-65569T1-300 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the DDC BU-65569T1-300. Calibration covers analog input channel accuracy and offset at all gain settings, analog output accuracy, digital I/O logic threshold verification, sample rate and timing accuracy, and trigger and synchronization bus functional verification. NI CompactRIO and PXI chassis also undergo backplane trigger line integrity check.. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common DDC BU-65569T1-300 faults: power supply failure (cRIO-9073/9074), C-series slot connector wear, PXI chassis fan failure, GPIB interface failure on VXI controllers, BIOS/EEPROM corruption. NI CompactRIO most common faults are power supply failure on older cRIO-9073/9074 chassis and C-series module slot connector wear from repeated hot-swap cycles. PXI chassis fan failure is the most common wear item — chassis fans are field-replaceable. VXI embedded controllers most commonly develop EEPROM corruption and GPIB interface failure.
DDC BU-65569T1-300 price
This DDC BU-65569T1-300 is listed at $2,600. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
DDC BU-65569T1-300 calibration cost
NIST-traceable calibration for the DDC BU-65569T1-300 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers analog input channel accuracy and offset at all gain settings, analog output accuracy, digital I/O logic threshold verification, sample rate and timing accuracy, and trigger and synchronization bus functional verification. NI CompactRIO and PXI chassis also undergo backplane trigger line integrity check.. Turnaround is 1 to 3 business days after receipt. See full calibration details →
