DDC BU-65569T4-200 MIL-STD-1553 CompactPCI Interface Card
DDC Embedded Test Systems. Channels: ** Four independent MIL-STD-1553 dual-redundant ch.
- Model
- DDC BU-65569T4-200
- Calibration
- Available on request
- Price
- $2,800
- Status
- In stock
- RFQ ref
- BU-65569T4-200
This unit
The DDC BU-65569T4-200 is a 3U CompactPCI interface card that implements MIL-STD-1553B Notice 2 and MIL-STD-1760 communication protocols for military and aerospace systems. Built on DDC's Enhanced Mini-ACE® architecture, it delivers four independent MIL-STD-1553 channels, each programmable as Bus Controller (BC), Remote Terminal (RT), Monitor (MT), or combined RT/Monitor. The card provides 64K words of RAM per channel, transformer or direct coupling options, and supports dual-redundant configurations. With 3.3-volt logic and convection cooling, it operates at low power while maintaining real-time data integrity for simulation, test, and embedded mission systems.
Technical Specifications
Bus Protocol: MIL-STD-1553B Notice 2 and MIL-STD-1760 compatible
Channels: Four independent MIL-STD-1553 dual-redundant channels
Channel Memory: 64K words RAM per channel
Logic Supply: 3.3-volt
Data Transfer: 32 × 32 FIFO for PCI burst writes; PCI interrupt support; bulk data transfer capable
Coupling Options: Transformer or direct coupled MIL-STD-1553 channels
Form Factor: 3U CompactPCI
Dimensions: 6.299 inches (160 mm) length × 3.937 inches (100 mm) height
Weight: Approximately 6.3 oz (180 g)
Cooling: Convection-cooled
I/O Interface: Front panel I/O connectors
Key Features
Independently programmable channels with autonomous BC architecture
Flexible RT buffering: single, double, subaddress circular, and global circular modes
Selective message monitor function
Low power consumption via 3.3-volt logic design
Dual-redundant channel architecture for high-availability systems
Typical Applications
Military and aerospace test systems
Embedded 1553 communication platforms
Real-time simulation and hardware-in-the-loop environments
Aircraft and vehicle avionics integration
Compatibility & Integration Supported by free software including C library and drivers for Windows® 9x/2000/XP, Windows NT®, Windows Server® 2003, Windows Vista®, and Linux®. CompactPCI bus interface enables integration into standard cPCI backplanes and systems.
Specifications
| Parameter | Value |
|---|---|
| Voltage / Current Range | 3.3V logic |
DDC BU-65569T4-200 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the DDC BU-65569T4-200. Calibration covers analog input channel accuracy and offset at all gain settings, analog output accuracy, digital I/O logic threshold verification, sample rate and timing accuracy, and trigger and synchronization bus functional verification. NI CompactRIO and PXI chassis also undergo backplane trigger line integrity check.. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common DDC BU-65569T4-200 faults: power supply failure (cRIO-9073/9074), C-series slot connector wear, PXI chassis fan failure, GPIB interface failure on VXI controllers, BIOS/EEPROM corruption. NI CompactRIO most common faults are power supply failure on older cRIO-9073/9074 chassis and C-series module slot connector wear from repeated hot-swap cycles. PXI chassis fan failure is the most common wear item — chassis fans are field-replaceable. VXI embedded controllers most commonly develop EEPROM corruption and GPIB interface failure.
DDC BU-65569T4-200 price
This DDC BU-65569T4-200 is listed at $2,800. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
DDC BU-65569T4-200 calibration cost
NIST-traceable calibration for the DDC BU-65569T4-200 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers analog input channel accuracy and offset at all gain settings, analog output accuracy, digital I/O logic threshold verification, sample rate and timing accuracy, and trigger and synchronization bus functional verification. NI CompactRIO and PXI chassis also undergo backplane trigger line integrity check.. Turnaround is 1 to 3 business days after receipt. See full calibration details →
