Kontron CP308 Intel Core 2 Duo 3U CompactPCI CPU Board
Kontron Embedded Test Systems. Model: CP308.
- Model
- Kontron CP308
- Calibration
- Available on request
- Price
- $1,650
- Status
- In stock
- RFQ ref
- CP308
This unit
The Kontron CP308 is a 3U CompactPCI CPU board built on Intel's 45nm Core 2 Duo mobile processors and GS45 mobile chipset for industrial computing. It delivers scalable performance up to 2.26 GHz with multiple processor options: standard 2.26 GHz, extended-temperature 1.2 GHz (-40°C to +85°C), low-voltage 1.86 GHz, and ultra-low-power 1.2 GHz configurations. The board supports up to 8GB DDR3 SDRAM with memory throughput of 17 GB/s at 1066 MHz bus speed.
Technical Specifications Processor
Intel Core 2 Duo, 45nm process
Scalable speeds: 2.26 GHz (standard), 1.86 GHz (LV), 1.2 GHz (extended-temp and ULV)
L2 Cache: 6 MB (3 MB for ULV versions) Chipset & Memory
Intel GS45 Express Chipset and ICH9M
Up to 8GB DDR3 SDRAM (two SO-DIMM slots)
Memory bus speed: 1066 MHz maximum
Memory throughput: 17 GB/s Storage & Expansion
2x fixed SATA connectors; additional SATA via extension modules
Optional USB NAND Flash module
Compact Flash socket and SD/SDHC card slot (mezzanine)
2.5" SATA HDD/SSD support via extension modules
4x PCIe x1 or 1x PCIe x4 (via I/O extension) CompactPCI Interface
PICMG 2.0 Rev. 3.0 compatible, 32-bit, 33MHz
5V and 3.3V signalling support
System master and PCI peripheral modes
Hot-swap capable (PICMG 2.1 R2.0 compliant) System Management
32-bit System Management Controller with IPMI firmware
Integrated Trusted Platform Module (iTPM)
Software-configurable watchdog: 125ms to 4096s
Temperature and voltage monitoring; fan supervision via IPMB bus Front Panel Interfaces (4HP)
2x Gigabit Ethernet with Wake-On-LAN
CRT VGA port
2x USB 2.0 ports
Status LEDs Power & Thermal
Typical consumption: 18W at 1.86 GHz LV
Graphics: Integrated Intel GS45 Graphics Memory Controller Hub
Key Features
Multiple processor variants for thermal and power optimization
Hardware-based encryption via iTPM
Flexible I/O expansion through mezzanine and extension modules
Dual Gigabit Ethernet for redundant network connectivity
Extended-temperature processor option supports -40°C to +85°C operation
Compatibility & Integration The CP308 integrates into standard CompactPCI backplanes via PICMG 2.0 and 2.1 specifications. The board functions as system master or peripheral, with optional rear I/O expansion and mezzanine card slots for storage and connectivity scaling.
Specifications
| Parameter | Value |
|---|---|
| Voltage / Current Range | 5V and 3.3V PCI signalling |
Kontron CP308 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Kontron CP308. Calibration covers analog input channel accuracy and offset at all gain settings, analog output accuracy, digital I/O logic threshold verification, sample rate and timing accuracy, and trigger and synchronization bus functional verification. NI CompactRIO and PXI chassis also undergo backplane trigger line integrity check.. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Kontron CP308 faults: power supply failure (cRIO-9073/9074), C-series slot connector wear, PXI chassis fan failure, GPIB interface failure on VXI controllers, BIOS/EEPROM corruption. NI CompactRIO most common faults are power supply failure on older cRIO-9073/9074 chassis and C-series module slot connector wear from repeated hot-swap cycles. PXI chassis fan failure is the most common wear item — chassis fans are field-replaceable. VXI embedded controllers most commonly develop EEPROM corruption and GPIB interface failure.
Kontron CP308 price
This Kontron CP308 is listed at $1,650. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Kontron CP308 calibration cost
NIST-traceable calibration for the Kontron CP308 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers analog input channel accuracy and offset at all gain settings, analog output accuracy, digital I/O logic threshold verification, sample rate and timing accuracy, and trigger and synchronization bus functional verification. NI CompactRIO and PXI chassis also undergo backplane trigger line integrity check.. Turnaround is 1 to 3 business days after receipt. See full calibration details →
