Adlink cPCI-6770/P7 NuIPC CPU Module
Adlink Embedded Test Systems. Frequency Range: 100 MHz (front-side bus), Voltage / Current Range: 12 V (monitored supplies), 3.3 V, 5 V.
- Model
- Adlink cPCI-6770/P7
- Calibration
- Available on request
- Price
- $750
- Status
- In stock
- RFQ ref
- cPCI-6770/P7
This unit
The Adlink cPCI-6770/P7 is a 6U CompactPCI CPU module purpose-built for industrial embedded systems requiring compact processor integration without external I/O transition boards. It combines an Intel Low Power BGA2 Pentium III processor with integrated front-panel I/O, onboard storage interfaces, and comprehensive system monitoring in a single-slot (4HP) form factor.
Technical Specifications
Processor & Memory- Intel Low Power BGA2 Pentium III CPU
- 100 MHz front-side bus (FSB)
- Two 144-pin SODIMM sockets supporting up to 512 MB SDRAM Storage
- Integrated 2.5-inch low-profile HDD housing
- Removable CompactFlash Type-II socket adapter capability
- IDE interface: UDMA-33, dual channels Graphics
- ATI Mobility Radeon M6 controller with 8 MB VRAM
- AGP VGA output via DB-15 connector I/O Interfaces
- Serial: COM1 (RS-232, DB-9), COM2 (RS-232/422/485, RJ-45)
- Ethernet: One 10/100Base-TX port via Intel 82559 controller (RJ-45)
- USB 1.1 (single port)
- Parallel port (26-pin connector)
- PS/2 keyboard and mouse combo port
- FDD support (34-pin and slim connectors)
- One PMC (PCI Mezzanine Card) socket for functional expansion System Management
- Software-programmable watchdog timer (1–255 seconds or 1–255 minutes) with system reset generation
- Hardware monitoring: CPU temperature, fan speed, system temperature, Vcore, and DC voltages (3.3 V, 5 V, 12 V)
- Real-time clock with 256 bytes battery-backed CMOS RAM, alarm function, maskable periodic interrupt, and 100-year calendar
- Power controller with PICMG 2.1 hot-swap compliance and supply voltage monitoring Physical
- Form factor: 6U CompactPCI, 233 mm (length) × 160 mm (width), 1 slot (4HP) Environmental
- Operating temperature: 0°C to 55°C
- Storage temperature: −20°C to 80°C
- Shock: 15 G peak-to-peak, 11 ms duration (non-operation)
- Vibration (non-operation): 1.88 Grms, 5–500 Hz
Key Features
- Integrated front-panel I/O eliminates external transition modules
- PCI bridges support up to seven peripherals in a single system
- Dual-channel UDMA-33 IDE supports both hard drives and CompactFlash expansion
- CompactPCI hot-swap capable with power ramp compliance
- Comprehensive on-board temperature and voltage monitoring
- Battery-backed real-time clock for timekeeping
Typical Applications Industrial control systems, field-deployed embedded platforms, compact data acquisition, and distributed processing where single-slot processor integration is required.
Compatibility & Integration The PMC slot enables functional expansion through compatible mezzanine modules. Standard CompactPCI backplane integration supports up to seven additional peripherals. IDE and CompactFlash interfaces provide flexible mass storage options without dedicated controller modules.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 100 MHz (front-side bus) | Voltage / Current Range: 12 V (monitored supplies), 3.3 V, 5 V |
Adlink cPCI-6770/P7 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Adlink cPCI-6770/P7. Calibration covers analog input channel accuracy and offset at all gain settings, analog output accuracy, digital I/O logic threshold verification, sample rate and timing accuracy, and trigger and synchronization bus functional verification. NI CompactRIO and PXI chassis also undergo backplane trigger line integrity check.. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Adlink cPCI-6770/P7 faults: power supply failure (cRIO-9073/9074), C-series slot connector wear, PXI chassis fan failure, GPIB interface failure on VXI controllers, BIOS/EEPROM corruption. NI CompactRIO most common faults are power supply failure on older cRIO-9073/9074 chassis and C-series module slot connector wear from repeated hot-swap cycles. PXI chassis fan failure is the most common wear item — chassis fans are field-replaceable. VXI embedded controllers most commonly develop EEPROM corruption and GPIB interface failure.
Adlink cPCI-6770/P7 price
This Adlink cPCI-6770/P7 is listed at $750. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Adlink cPCI-6770/P7 calibration cost
NIST-traceable calibration for the Adlink cPCI-6770/P7 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers analog input channel accuracy and offset at all gain settings, analog output accuracy, digital I/O logic threshold verification, sample rate and timing accuracy, and trigger and synchronization bus functional verification. NI CompactRIO and PXI chassis also undergo backplane trigger line integrity check.. Turnaround is 1 to 3 business days after receipt. See full calibration details →
