Tektronix DPO4EMBD Embedded Serial Triggering and Analysis
Tektronix Logic Analyzers. Model: DPO4EMBD.
- Model
- Tektronix DPO4EMBD
- Calibration
- Available on request
- Price
- $1,300
- Status
- In stock
- RFQ ref
- DPO4EMBD
This unit
The Tektronix DPO4EMBD is an embedded serial triggering and analysis module that extends DPO4000 and MSO/DPO4000 series oscilloscope capabilities for debugging complex embedded systems. It delivers automated triggering, decoding, and search functionality across nine embedded serial protocols, enabling packet-level analysis on critical bus elements including addresses, data content, and identifiers.
Technical Specifications
The module supports simultaneous decoding of up to four serial and/or parallel buses. Signal acquisition utilizes any analog channel (Ch1–Ch4) and, on MSO models, any digital channel (D0–D15). USB triggering and decode functions operate on all compatible models; HS triggering and decode are available on 1 GHz models in specific series only. Ethernet support is limited to MDO4000C Series (10BASE-T and 100BASE-TX compatible).Key Features
- Packet-level triggering on addresses, data, start of packets, and unique identifiers across multiple serial buses
- Protocol support: I2C, SPI, CAN, CAN FD, LIN, FlexRay, RS-232/422/485/UART, MIL-STD-1553, ARINC 429, I2S/LJ/RJ/TDM, USB, and Ethernet
- Bus display consolidates individual signals (clock, data, chip enable) for simplified packet boundary identification
- Decoded value display formats: Hex, Binary, Decimal, Signed Decimal, and ASCII depending on protocol
- Event table with time-stamped packet capture exportable to .csv format
- Search and mark functionality for user-defined packet criteria with rapid front-panel navigation
- Single-ended probing recommended for I2C and SPI; single-ended and differential probing for 10BASE-T; differential probing required for 100BASE-TX
Typical Applications Embedded system validation and debug across automotive, industrial, and communication platforms requiring multi-protocol bus analysis and correlation.
Compatibility & Integration Designed for Tektronix DPO4000 and MSO/DPO4000 series oscilloscopes. CAN FD and certain USB specifications are not available on MSO/DPO2000 Series.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 1 GHz |
Tektronix DPO4EMBD — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Tektronix DPO4EMBD. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Tektronix DPO4EMBD price
This Tektronix DPO4EMBD is listed at $1,300. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Tektronix DPO4EMBD calibration cost
NIST-traceable calibration for the Tektronix DPO4EMBD is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
