Fluke DSP-Fiber Test Kit
Fluke Optical Power Meters. Accuracy: ±0.25 dB at -10.0 dBm (25°C) or ±0.25 dB (18–, Resolution: 0.01 dB (0.001 µW).
- Model
- Fluke DSP-Fiber
- Calibration
- Available on request
- Price
- $870
- Status
- In stock
- RFQ ref
- DSP-Fiber
This unit
The Fluke DSP-Fiber Test Kit is a modular fiber optic test solution for network technicians and installers performing cable verification, loss measurement, and fault identification in multimode and singlemode fiber installations. The kit combines an optical power meter, LED-based power source, and field-proven fiber test adapters to deliver automated dual-fiber, dual-wavelength testing with pass/fail certification against industry standards.
Technical Specifications Fluke DSP-FOM Fiber Optic Power Meter
Calibrated wavelengths: 850 nm, 1300 nm, 1550 nm
Measurement range: +3 dBm to -50 dBm
Measurement accuracy: ±0.25 dB at -10.0 dBm (25°C) or ±0.25 dB (18–28°C, ≤90% RH)
Display resolution: 0.01 dB (0.001 µW)
Detector: Germanium
Optical adapter: ST
I/O connector: RJ45 8-pin with ground shield
Dimensions: 11.4 cm × 6.4 cm × 3.8 cm
Weight: 141.7 g
Battery: 9 V alkaline (90 hours typical)
Operating temperature: 0°C to +40°C
Storage temperature: -10°C to +60°C or -20°C to +70°C
Operating humidity: 0–75% RH, non-condensing Fluke FOS-850/1300 Optical Power Source
Transmit wavelengths: 850 nm, 1300 nm
Source type: LED
Power output: -20 dBm
Optical adapter: ST
Battery: 9 V alkaline Fluke LS-1310/1550 Laser Source (Optional)
Transmit wavelengths: 1310 nm, 1550 nm
Emitter type: Laser
Power output: -10 dBm
Laser classification: Class 1
Compliance: ANSI/ISA S82.01-1994, CSA C22.2 No.
Key Features
Automated dual-fiber, dual-wavelength test and certification
FindFiber™ connectivity verification
Bi-directional testing capability
Length measurement support for singlemode fiber links (select adapters)
Small Form Factor (SFF) link testing with optional kits
Pass/fail results aligned to common fiber test standards
Typical Applications Multimode fiber at 850 nm and 1300 nm; singlemode fiber at 1310 nm and 1550 nm. Gigabit Ethernet multimode and singlemode link certification and troubleshooting.
Compatibility & Integration Compatible with Fluke DSP-4000 Series CableAnalyzers, DSP-100 CableMeter, OneTouch Network Assistant, and OptiView Integrated Network Analyzer. Fiber test adapters interface directly with supported Fluke testers for integrated test workflows.
Specifications
| Parameter | Value |
|---|---|
| Power Range (dBm) | '+3 dBm to -50 dBm (meter) |
| -10 dBm (laser source) | Voltage / Current Range | 9 V alkaline battery | Wavelength Range: 1300 nm, 1310 nm, 1550 nm, 850 nm |
Fluke DSP-Fiber — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Fluke DSP-Fiber. Calibration covers detector responsivity at 850, 1310, 1490, 1550, and 1625 nm, absolute power accuracy, linearity across the full dynamic range, and reference power level. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Fluke DSP-Fiber faults: detector contamination, damaged FC/PC input port, display failure. Common repairs include detector port cleaning or replacement, display repair, and battery or capacitor replacement in older HP/Agilent/Keysight units.
Fluke DSP-Fiber price
This Fluke DSP-Fiber is listed at $870. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Fluke DSP-Fiber calibration cost
NIST-traceable calibration for the Fluke DSP-Fiber is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers detector responsivity at 850, 1310, 1490, 1550, and 1625 nm, absolute power accuracy, linearity across the full dynamic range, and reference power level. Turnaround is 1 to 3 business days after receipt. See full calibration details →
