Keysight / Agilent / HP E2071 / 82341 HPIB Card
Keysight / Agilent / HP Embedded Test Systems.
- Model
- Keysight / Agilent / HP E2071 / 82341
- Calibration
- Available on request
- Price
- $110
- Status
- In stock
- RFQ ref
- E2071 / 82341
This unit
The Keysight/Agilent/HP E2071/82341 HPIB Card is a 16-bit ISA/EISA interface adapter that bridges PC-based systems to Hewlett-Packard Interface Bus (HPIB/GPIB/IEEE-488) instruments. This single-slot expansion card enables automated test control, data acquisition, and instrument communication across multiple platforms, supporting up to 14 instruments on a single bus with configurable I/O addressing and interrupt handling via DIP switches or software.
Technical Specifications
Interface Protocol: HPIB (IEEE-488.1/488.2, GPIB)
Maximum Data Transfer Rate: 1.5 MB/s
DMA-Enabled Performance: Up to 900 KB/s
Instrument Bus Capacity: Up to 14 instruments per bus
Backplane: ISA/EISA 16-bit
Slot Requirement: One expansion slot
I/O Address: Configurable via DIP switches; Plug and Play support on later models
IRQ Line: Configurable via software or DIP switches
Bus Address: Typically set to 30 for SICL configurations
Built-In I/O Buffering: Yes
Automatic Handshaking: Supported
Programmable Interrupts: Yes
Direct Memory Access (DMA): Supported
Key Features
Configurable I/O addressing for flexible system integration
Support for multiple programming languages: C, C++, Visual Basic, BASIC for Windows, and Agilent VEE
Compatible I/O libraries: SICL, VISA, HP Command Library, and HP I/O Libraries
Standard HPIB cable connectivity to test instruments
Typical Applications
Automated test systems in production environments
Research and development instrument control
Laboratory data acquisition and instrument management
Compatibility & Integration Supported operating systems include Windows 3.1, Windows 95/98/NT/2000, Windows NT, HP-UX 10.20, HP-UX 9.x (SICL only), and MS-DOS. Compatible with HP instrument models 82341C, 85123A, 89075C, E2910A, E4840A, E4849A, E8431A, G2030A, and Z5200FB. ChemStation software support available for versions A.07.0x and above on 82350A and specific versions on 82341C/D models.
Keysight / Agilent / HP E2071 / 82341 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Keysight / Agilent / HP E2071 / 82341. Calibration covers analog input channel accuracy and offset at all gain settings, analog output accuracy, digital I/O logic threshold verification, sample rate and timing accuracy, and trigger and synchronization bus functional verification. NI CompactRIO and PXI chassis also undergo backplane trigger line integrity check.. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Keysight / Agilent / HP E2071 / 82341 faults: power supply failure (cRIO-9073/9074), C-series slot connector wear, PXI chassis fan failure, GPIB interface failure on VXI controllers, BIOS/EEPROM corruption. NI CompactRIO most common faults are power supply failure on older cRIO-9073/9074 chassis and C-series module slot connector wear from repeated hot-swap cycles. PXI chassis fan failure is the most common wear item — chassis fans are field-replaceable. VXI embedded controllers most commonly develop EEPROM corruption and GPIB interface failure.
Keysight / Agilent / HP E2071 / 82341 price
This Keysight / Agilent / HP E2071 / 82341 is listed at $110. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Keysight / Agilent / HP E2071 / 82341 calibration cost
NIST-traceable calibration for the Keysight / Agilent / HP E2071 / 82341 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers analog input channel accuracy and offset at all gain settings, analog output accuracy, digital I/O logic threshold verification, sample rate and timing accuracy, and trigger and synchronization bus functional verification. NI CompactRIO and PXI chassis also undergo backplane trigger line integrity check.. Turnaround is 1 to 3 business days after receipt. See full calibration details →
