Agilent/Keysight E8793A
The Agilent/Keysight E8793A is a system simulator.
- Model
- Agilent / Keysight E8793A
- Calibration
- Available on request
- Price
- $2,050
- Status
- In stock
- RFQ ref
- E8793A
This unit
The Keysight E8793A is a 32-pin matrix module engineered for integration into Keysight TS-5000 series functional test systems. It delivers high-speed DC/AC measurements and high power handling capabilities, serving as a core component in automotive and complex electronic control module test environments such as the TS-5400 Series II Automotive Functional Test System.
Technical Specifications
- Product Type: 32-Pin Matrix Module
- System Compatibility: Keysight TS-5000 Series, TS-5400 Series II Automotive Functional Test System
- Interfaces: TestExec SL, GPIB, VXI
- Measurement Capability: High-speed DC/AC measurements with high power handling
- Channel Density: Increases measurement channel density within compatible test platforms
Key Features
- Multi-interface support enables integration with both legacy VXI-based platforms and modern PXI architecture
- Modular design allows configuration with complementary TS-5000 series components
- Supports both instrument-level control and direct pin-level switching operations
- Contributes to overall test system measurement density improvements
Typical Applications
- Automotive electronic control unit (ECU) functional testing
- Complex multi-pin device characterization
- High-current and high-voltage DC/AC measurement setups
- Integrated automotive powertrain and body electronics verification
Compatibility & Integration The E8793A works with other TS-5000 series modules including the E8792A 32-Pin Matrix and Instrument Multiplexer Module, E8782A 24-Instrument 40-Measurement Matrix Card, E8783A 64-Pin Matrix Card, N9379A Multi-Channel Loadcard, and E6198A TS-5400 Series II Switch/Load Unit. System interconnection uses standard twisted-pair and DIN cables such as the E3751-61601 64-Conductor Twisted-Pair Cable and E3750-61608 96-Pin, 64-Conductor to 96-Pin DIN Cable.
Specifications
| Parameter | Value |
|---|---|
| Voltage / Current Range | '+5 VDC |
Agilent / Keysight E8793A — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Agilent / Keysight E8793A. Calibration covers analog input channel accuracy and offset at all gain settings, analog output accuracy, digital I/O logic threshold verification, sample rate and timing accuracy, and trigger and synchronization bus functional verification. NI CompactRIO and PXI chassis also undergo backplane trigger line integrity check.. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Agilent / Keysight E8793A faults: power supply failure (cRIO-9073/9074), C-series slot connector wear, PXI chassis fan failure, GPIB interface failure on VXI controllers, BIOS/EEPROM corruption. NI CompactRIO most common faults are power supply failure on older cRIO-9073/9074 chassis and C-series module slot connector wear from repeated hot-swap cycles. PXI chassis fan failure is the most common wear item — chassis fans are field-replaceable. VXI embedded controllers most commonly develop EEPROM corruption and GPIB interface failure.
Agilent / Keysight E8793A price
This Agilent / Keysight E8793A is listed at $2,050. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Agilent / Keysight E8793A calibration cost
NIST-traceable calibration for the Agilent / Keysight E8793A is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers analog input channel accuracy and offset at all gain settings, analog output accuracy, digital I/O logic threshold verification, sample rate and timing accuracy, and trigger and synchronization bus functional verification. NI CompactRIO and PXI chassis also undergo backplane trigger line integrity check.. Turnaround is 1 to 3 business days after receipt. See full calibration details →
