Rohde & Schwarz ETL TV Analyzer 500 kHz to 3 GHz
Rohde & Schwarz Spectrum Analyzers. Frequency range: 500 kHz to 3 GHz, Resolution: 1 Hz, Voltage: 80 V.
- Model
- Rohde & Schwarz ETL
- Calibration
- Available on request
- Price
- $7,970
- RFQ ref
- ETL
This unit
The Rohde & Schwarz ETL TV Analyzer operates across 500 kHz to 3 GHz and functions as an integrated test platform for television and sound broadcasting signal analysis. This single instrument combines TV test receiver, spectrum analyzer, MPEG transport stream analyzer, and video/audio analysis capabilities. Field and laboratory deployments benefit from its ability to support analog standards (PAL, NTSC, SECAM), digital TV formats (DVB-T/T2, ATSC, ISDB-T, DTMB, DVB-C, J.83/A/B/C, T-DMB), and radio standards (DAB, FM).
Technical Specifications
Frequency Coverage- Frequency range: 500 kHz to 3 GHz
- Frequency resolution: 1 Hz
- Internal reference frequency (standard): 1 × 10⁻⁶ aging per year; 1 × 10⁻⁶ temperature drift (0 °C to +50 °C)
- Internal reference frequency (R&S ETL-B4 OCXO): 1 × 10⁻⁷ aging per year; 1 × 10⁻⁷ temperature drift (0 °C to +50 °C) Spectral Purity (SSB Phase Noise)
- 1 kHz offset: –90 dBc (1 Hz) typical
- 10 kHz offset: < –98 dBc (1 Hz), typical –103 dBc (1 Hz)
- 100 kHz offset: < –105 dBc (1 Hz), typical –110 dBc (1 Hz)
- 1 MHz offset: < –125 dBc (1 Hz), typical –130 dBc (1 Hz) Input Protection & Level Measurements
- Maximum DC voltage: 80 V
- Maximum CW RF power (preamplifier OFF): 30 dBm (1 W)
- Maximum CW RF power (preamplifier ON): 20 dBm (0.1 W)
- Maximum peak RF power (preamplifier OFF): 36 dBm (4 W) for t 200 MHz): +5 dBm nominal Signal Analysis Performance
- Video signal-to-noise ratio (analog TV): > 60 dB
- Intrinsic MER (digital TV, signal level ≥ –30 dBm, f ≤ 1.3 GHz): DTMB > 40 dB typical 46 dB; general > 34 dB
Key Features
- Real-time FPGA and chip-based demodulators for analog and digital TV, FM, and DAB
- MPEG-2 transport stream analysis with stream generation, recording, and ETSI TR 101 290 compliance
- Integrated spectrum analyzer for emission measurements
- Integrated video and audio signal generators
Typical Applications
- Acceptance testing of broadcast equipment
- Transmitter maintenance and troubleshooting
- Production quality assurance
- Network optimization and signal monitoring
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 500 kHz to 3 GHz | Power Range (dBm): ≤ –140 dBm to Typ. –166 dBm |
Rohde & Schwarz ETL — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Rohde & Schwarz ETL. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Rohde & Schwarz ETL price
This Rohde & Schwarz ETL is listed at $7,970. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Rohde & Schwarz ETL calibration cost
NIST-traceable calibration for the Rohde & Schwarz ETL is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →