FLC Electronics F10A
FLC Electronics RF Amplifiers. Bandwidth: ** DC to ~1 MHz (at maximum Vpp), Current: limiting circuit protects against accidental short.
- Model
- FLC Electronics F10A
- Calibration
- Available on request
- Price
- $1,450
- Status
- In stock
- RFQ ref
- F10A
This unit
The FLC Electronics F10A is a single-channel, broadband linear amplifier engineered for laboratory and industrial applications demanding precise high-voltage signal amplification. With a fixed gain of 10×, it accepts input signals up to ±10 V and delivers bipolar output spanning −100 V to +100 V, making it ideal for driving piezo actuators, MEMS devices, OLEDs, and liquid crystal displays. The amplifier maintains linear operation from DC through approximately 1 MHz at maximum voltage swing, with a slew rate of 400 V/µs and output impedance below 0.1 Ω in linear mode.
Technical Specifications
Gain: 10.0066 ± 0.18% at DC
Input Voltage Range: ±10 V maximum
Output Voltage Range: −100 V to +100 V (bipolar)
Output Current (Continuous): 185 mA with current limiting
Maximum Output Power: Approximately 30 W
Bandwidth: DC to ~1 MHz (at maximum Vpp)
Slew Rate: 400 V/µs (factory setting, adjustable on request)
Input Impedance: 1 MΩ || 30 pF
Output Impedance: < 0.1 Ω (linear mode)
Dimensions: 112 mm (H) × 255 mm (W) × 316 mm (D)
Weight: 4 kg
Power Supply: 100/110 V or 220/230 V, 50/60 Hz (3.15 A or 2 A slow fuse, respectively)
Operating Temperature: 0°C to 30°C
Storage Temperature: 0°C to 60°C
Key Features
Fixed 10× voltage gain enabling ±10 V source to generate ±100 V output
Capacitive load capability limited by slew rate - approximately 400 pF at factory setting (cable capacitance included)
Current-limiting circuit protects against accidental short circuits
High input impedance (1 MΩ) minimizes source loading
Isolated BNC output connector for safety compliance
Input protection via 15 mA micro-fuse; spare included
Typical Applications
Piezoelectric actuator driving
MEMS device control
OLED panel testing and operation
Liquid crystal display characterization
General-purpose high-voltage signal amplification
Compatibility & Integration Accepts resistive and small capacitive loads. Can drive small (mH) inductances in series with resistance but cannot drive purely inductive loads. Output signal monitoring via oscilloscope is recommended. Manufactured in Poland.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | DC to ~1 MHz | Voltage / Current Range: ±10 V input, −100 V to +100 V output, 185 mA continuous |
FLC Electronics F10A — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the FLC Electronics F10A. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
FLC Electronics F10A price
This FLC Electronics F10A is listed at $1,450. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
FLC Electronics F10A calibration cost
NIST-traceable calibration for the FLC Electronics F10A is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
