Rohde and Schwarz FSVA13 Signal & Spectrum Analyzer, 13.6 GHz
Rohde & Schwarz Spectrum Analyzers. Frequency Range: 10 Hz to 13.6 GHz, Bandwidth: 28 MHz standard.
- Model
- Rohde & Schwarz FSVA13
- Calibration
- Available on request
- Price
- $22,500
- RFQ ref
- FSVA13
This unit
The Rohde & Schwarz FSVA13 is a signal and spectrum analyzer engineered for RF characterization across 10 Hz to 13.6 GHz. It delivers the dynamic range and phase noise performance required for cellular, LTE, satellite, radar, and component testing. The instrument combines a standard 28 MHz analysis bandwidth (expandable to 160 MHz) with exceptional sensitivity and linearity, enabling precise spectral measurements and signal demodulation.
An intuitive touchscreen interface streamlines operation across development, production, installation, and field-service workflows.
Technical Specifications
- Frequency Range: 10 Hz to 13.6 GHz
- Analysis Bandwidth: 28 MHz standard; 40 MHz or 160 MHz optional
- Level Measurement Uncertainty: 0.4 dB up to 7 GHz
- Displayed Average Noise Level (DANL): –168 dBm typical (1 Hz); –155 dBm at 1 GHz; –147 dBm at 30 GHz; –162 dBm at 30 GHz with R&S®FSV-B24 preamplifier
- Third-Order Intercept (TOI): +10 dBm nominal up to 7 GHz; +5 dBm nominal above 7 GHz; –5 dBm nominal with preamplifier (≤7 GHz); –25 dBm nominal with preamplifier (>7 GHz)
- Phase Noise: –118 dBc (1 Hz) at 1 GHz with 10 kHz offset; –117 dBc at 1 GHz with 10 kHz offset
- 1 dB Compression: Specified
Key Features
- Wide frequency coverage from 10 Hz to 13.6 GHz
- Optional bandwidth expansion to 160 MHz across full frequency range
- Low phase noise across offset frequencies from 100 Hz to 10 MHz
- Selectable RF preamplifier for enhanced sensitivity in demanding measurements
- Frequency-dependent DANL optimization through full operating range
Typical Applications
- Cellular and LTE system characterization
- Satellite communication signal analysis
- Radar and microwave component testing
- Component validation in production environments
- Field installation and maintenance measurements
Compatibility & Integration Optional preamplifiers (R&S®FSV-B22, R&S®FSV-B24) and bandwidth modules (R&S®FSV-B70, R&S®FSV-B160) extend capability for specialized measurement scenarios.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 10 Hz to 13.6 GHz | Power Range (dBm): '-168 dBm to +20 dBm |
Rohde & Schwarz FSVA13 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Rohde & Schwarz FSVA13. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Rohde & Schwarz FSVA13 price
This Rohde & Schwarz FSVA13 is listed at $22,500. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Rohde & Schwarz FSVA13 calibration cost
NIST-traceable calibration for the Rohde & Schwarz FSVA13 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
