Rhode and Schwarz FSVA7 Spectrum Analyzer
Rohde & Schwarz Spectrum Analyzers. Bandwidth: up to 40 MHz standard, Accuracy: 0.1% (span = 0 Hz).
- Model
- Rohde & Schwarz FSVA7
- Calibration
- Available on request
- Price
- $25,600
- RFQ ref
- FSVA7
This unit
The Rohde & Schwarz FSVA7 is a spectrum and signal analyzer delivering precise RF characterization across 10 Hz to 7 GHz. Built for research, development, and production environments, it combines wide instantaneous analysis bandwidth with exceptional noise performance and phase stability. Engineers rely on this instrument for demanding measurements where measurement uncertainty and signal fidelity determine design validation success.
Technical Specifications
Frequency Coverage- 10 Hz to 7 GHz (standard)
- Extension to 20 Hz available via Option B29
- Type N (female) RF input connector with 50 Ω impedance Analysis Capabilities
- Signal analysis bandwidth: up to 40 MHz standard; 160 MHz with R&S®FSV-B160 option
- 7.5 kHz channel filter support
- 200 Msample signal memory for long sequence recording
- Level measurement uncertainty: 0.4 dB (10 Hz to 7 GHz) Noise and Dynamic Range
- Displayed Average Noise Level: –155 dBm at 1 GHz; –147 dBm at 30 GHz
- –162 dBm at 30 GHz with R&S®FSV-B24 preamplifier
- Phase noise: –110 dBc (1 Hz) at 10 kHz offset
- Third-order intercept: +15 dBm
- Residual spurious response: –90 dBm (RF attenuation 0 dB, f ≥ 100 MHz) Amplitude Linearity
- Flatness: ±0.3 dB (nominal, f ≤ 7 GHz, +20–30 °C)
- Nonlinearity: < 0.15 dB (0 to –70 dB range)
- Deviation from linear phase: ±1° (nominal, f ≤ 7 GHz) Measurement Performance
- Sweep time accuracy: 0.1% (span = 0 Hz); 1% (span ≥ 10 Hz swept)
- Bandwidth uncertainty: < 3% (nominal)
- Shape factor (60:3 dB): < 5 (nominal)
Key Features
- Low noise floor enables detection of weak signals and distortion products
- Fast sweep speed and signal memory support time-domain analysis
- Flexible input filtering and attenuation control for high dynamic range measurements
Typical Applications
- GSM/EDGE and EDGE Evolution
- WCDMA/HSPA and WCDMA/HSPA+
- LTE and LTE-Advanced
- WiMAX™
- WLAN (IEEE 802.11ac)
- CDM measurements
Compatibility & Integration Frequency extensions and bandwidth options expand measurement capability beyond the base 7 GHz upper limit. RF preamplifier and filter options optimize noise floor and selectivity for specific applications.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 10 Hz to 7 GHz | Power Range (dBm): '-155 dBm to -147 dBm |
Rohde & Schwarz FSVA7 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Rohde & Schwarz FSVA7. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Rohde & Schwarz FSVA7 price
This Rohde & Schwarz FSVA7 is listed at $25,600. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Rohde & Schwarz FSVA7 calibration cost
NIST-traceable calibration for the Rohde & Schwarz FSVA7 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
