Fluke FTK200 Optical Fiber Test Kit
Fluke Fiber Characterization Systems. Resolution: 0.01 dB, Accuracy: ±0.25 dB at 25 °C.
- Model
- Fluke FTK200
- Calibration
- Available on request
- Price
- $380
- Status
- In stock
- RFQ ref
- FTK200
This unit
The Fluke FTK200 Optical Fiber Test Kit delivers optical power and loss measurement across multiple wavelengths for multimode and singlemode fiber verification. The kit pairs the FM150 Fiber Meter with the FS150 Fiber Source to enable loss measurements, continuity checks, and power characterization essential for network installation and maintenance. Measurements display in dBm or µW with 0.01 dB resolution and ±0.25 dB accuracy. Data logging stores up to 500 measurements per wavelength, with serial output and PC integration via included Data-LINK software for reporting and live power stability analysis.
Technical Specifications FM150 Fiber Meter
Measurement range: +6 dBm to -50 dBm
Resolution: 0.01 dB
Accuracy: ±0.25 dB at 25 °C
Wavelengths: 850 nm, 1300 nm, 1310 nm, 1550 nm
Detector: Germanium
Power units: dBm or µW
Memory: 500 measurements per wavelength
Battery: 9V alkaline, up to 30 hours operation
Auto power-down: ~5 minutes idle
Operating temperature: 0 °C to +50 °C
Storage temperature: -30 °C to +60 °C
Humidity: 0 to 95% RH (non-condensing)
Dimensions: 3.2 in × 5.8 in × 1.5 in
Weight: 8.6 oz (244 g)
Data interface: Serial port with Data-LINK software FS150 Fiber Source
Wavelengths: 850 nm, 1300 nm
Output power: -20 dBm nominal (62.5 µm multimode fiber)
Stability: ±0.2 dB per 8 hours at 20 °C; ±0.1 dB per 8 hours at 25 °C (post 20-minute warm-up)
Connector: ST
Battery: 9V alkaline, ~24 hours typical
Operating temperature: 0 °C to +40 °C
Humidity: Up to 75% RH at 0 °C to +40 °C
Dimensions: 4.5 in × 2.5 in × 1.5 in
Key Features
Dual-wavelength source for 850 nm and 1300 nm multimode testing
Loss comparison via stored reference level
Battery status display with low-battery indicator
Live data capture for power stability verification
Report generation through Data-LINK software
Typical Applications
Fiber optic network installation and commissioning
Loss budget verification across multimode and singlemode links
Field troubleshooting and continuity testing
Power output characterization from network interface cards and test sources
Compatibility & Integration Serial port connectivity enables data upload to PC and output to serial printers. Data-LINK software manages measurement archiving, real-time monitoring, and documentation generation.
Specifications
| Parameter | Value |
|---|---|
| Power Range (dBm) | '+6 dBm to -50 dBm | Wavelength Range: 1300 nm, 1310 nm, 1550 nm, 850 nm |
Fluke FTK200 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Fluke FTK200. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Fluke FTK200 price
This Fluke FTK200 is listed at $380. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Fluke FTK200 calibration cost
NIST-traceable calibration for the Fluke FTK200 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
