JDS Uniphase HA9 - HA97E-19KSC1
JDS Uniphase Optical Attenuators. Resolution: ** 0.01 dB nominal, Accuracy: ** ±0.1 dB typical (±0.15 dB in some configurati.
- Model
- JDS Uniphase HA97E-19KSC1
- Calibration
- Available on request
- Price
- $1,950
- Status
- In stock
- RFQ ref
- HA97E-19KSC1
This unit
The JDS Uniphase HA97E-19KSC1 is a programmable optical attenuator delivering precise control of optical signal power across telecommunications, data networking, and laboratory environments. Part of the HA9 Series, this instrument combines extended attenuation range with high resolution and repeatability, making it essential for power meter calibration, component characterization, and system validation where accurate attenuation control is critical.
Technical Specifications
Attenuation Range: Extended range up to 100 dB
Resolution: 0.01 dB nominal
Repeatability: ±0.01 dB
Accuracy: ±0.1 dB typical (±0.15 dB in some configurations; accuracy varies outside calibrated wavelength ranges)
Wavelength Range: 1200–1700 nm standard; 750–1700 nm available for specific models
Wavelength Dependence: <±0.05 dB over 1530–1625 nm
Polarization Dependent Loss: Typically 0.03 dB
Maximum Input Power: 1000 mW (30 dBm)
Return Loss: High; internal reflections better than 60 dB with cavity effects virtually eliminated
Fiber Options: Single-mode or multimode configurations
Key Features
GPIB and RS232 remote control with SCPI/HP8156A-compatible command set
Front panel keyboard control
Built-in beam block
Optional 2/98, 10/90, 30/70, or 50/50 couplers
Optional integrated switches for output tap or dual input/output access
CE, UL3101-1, and CAN/CSA-C22.2 No. 1010.1 compliant
Typical Applications
Optical power meter linearity calibration
BER and analog transmission testing
Fiber optic link loss simulation
EDFA output power characterization
DWDM system measurements
Multichannel AM and high-rate PCM system validation
Compatibility & Integration Remote programming via GPIB or RS232 interfaces enables integration into automated test systems and real-time measurement setups. SCPI command compatibility ensures straightforward software integration with existing HP8156A-based installations.
Specifications
| Parameter | Value |
|---|---|
| Power Range (dBm) | 30 dBm (1000 mW maximum input power) | Wavelength Range: 1200–1700 nm (standard) |
JDS Uniphase HA97E-19KSC1 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the JDS Uniphase HA97E-19KSC1. Calibration covers attenuation accuracy at 5 or more set values across the full range (0 to rated maximum dB), attenuation linearity, wavelength-dependent attenuation at 1310 nm, 1490 nm, and 1550 nm, insertion loss at minimum attenuation (0 dB position), and polarization-dependent loss (PDL) where applicable. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common JDS Uniphase HA97E-19KSC1 faults: motor and gear mechanism wear (attenuation steps or loss of smooth control), optical port contamination, EEPROM calibration data corruption. Most common faults are motor or gear mechanism wear on variable attenuators causing attenuation steps or loss of smooth control, optical port contamination reducing dynamic range, and EEPROM calibration data corruption on digitally controlled models.
JDS Uniphase HA97E-19KSC1 price
This JDS Uniphase HA97E-19KSC1 is listed at $1,950. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
JDS Uniphase HA97E-19KSC1 calibration cost
NIST-traceable calibration for the JDS Uniphase HA97E-19KSC1 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers attenuation accuracy at 5 or more set values across the full range (0 to rated maximum dB), attenuation linearity, wavelength-dependent attenuation at 1310 nm, 1490 nm, and 1550 nm, insertion loss at minimum attenuation (0 dB position), and polarization-dependent loss (PDL) where applicable. Turnaround is 1 to 3 business days after receipt. See full calibration details →
