JDS Uniphase MTA100
JDS Uniphase Optical Attenuators. Resolution: 0.05 dB nominal, Accuracy: ±0.1 dB maximum.
- Model
- JDS Uniphase MTA100
- Calibration
- Available on request
- Price
- $2,400
- Status
- In stock
- RFQ ref
- MTA100
This unit
The JDS Uniphase MTA100 is a 19-inch rack-mountable optical test chassworks with precision attenuation control and measurement across the extended optical spectrum. The modular platform accommodates up to eight MTA300 attenuator cassettes and one MTA150 control cassette, enabling configurable test setups for R&D, manufacturing, and quality assurance environments.
Technical Specifications Chassis & Power
19-inch rack-mountable AC-powered chassis
Input: 100-240 VAC, 50-60 Hz, single-phase
Maximum power consumption: 80 VA
Fuse: T1A/250V (slow-blow) Optical Attenuator Cassettes (MTA300)
Attenuation resolution: 0.05 dB nominal
Attenuation accuracy: ±0.1 dB maximum
Calibrated wavelength range: 1200 nm to 1700 nm
Optimal performance range: 1545 nm to 1645 nm
Low polarization-dependent loss (PDL)
High return loss; etalon-free optical design Control & Interface
Control cassette: MTA150 with IEEE 488.2 (GPIB) Environmental
Operating temperature: -55°C to +105°C
Key Features
Modular cassette architecture supports mixed configurations
Etalon-free design minimizes signal distortion across the calibrated bandwidth
Precision attenuation control in 0.05 dB steps with ±0.1 dB accuracy
Extended wavelength coverage from 1200 nm to 1700 nm with optimized performance in the C-band (1545–1645 nm)
GPIB control enables integration into automated test systems
Class 1 instrument classification with protective earth grounding
Typical Applications
Optical component characterization and validation
Signal attenuation measurement in fiber-optic systems
Manufacturing test automation for optical devices
R&D evaluation of optical signal integrity
Compatibility & Integration The MTA100 chassis directly accepts JDS Uniphase MTA300 attenuator cassettes and MTA150 control cassettes. GPIB connectivity integrates the system into existing laboratory and production test benches.
Specifications
| Parameter | Value |
|---|---|
| Voltage / Current Range | 100-240 VAC, 50-60 Hz, 80 VA maximum | Wavelength Range: 1200 nm to 1700 nm (calibrated) |
JDS Uniphase MTA100 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the JDS Uniphase MTA100. Calibration covers attenuation accuracy at 5 or more set values across the full range (0 to rated maximum dB), attenuation linearity, wavelength-dependent attenuation at 1310 nm, 1490 nm, and 1550 nm, insertion loss at minimum attenuation (0 dB position), and polarization-dependent loss (PDL) where applicable. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common JDS Uniphase MTA100 faults: motor and gear mechanism wear (attenuation steps or loss of smooth control), optical port contamination, EEPROM calibration data corruption. Most common faults are motor or gear mechanism wear on variable attenuators causing attenuation steps or loss of smooth control, optical port contamination reducing dynamic range, and EEPROM calibration data corruption on digitally controlled models.
JDS Uniphase MTA100 price
This JDS Uniphase MTA100 is listed at $2,400. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
JDS Uniphase MTA100 calibration cost
NIST-traceable calibration for the JDS Uniphase MTA100 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers attenuation accuracy at 5 or more set values across the full range (0 to rated maximum dB), attenuation linearity, wavelength-dependent attenuation at 1310 nm, 1490 nm, and 1550 nm, insertion loss at minimum attenuation (0 dB position), and polarization-dependent loss (PDL) where applicable. Turnaround is 1 to 3 business days after receipt. See full calibration details →
