JDS Uniphase MAPA+2370100FA
JDS Uniphase Optical Attenuators. Resolution: 0.01 dB.
- Model
- JDS Uniphase MAPA+2370100FA
- Calibration
- Available on request
- Price
- $2,200
- Status
- In stock
- RFQ ref
- MAPA+2370100FA
This unit
The JDS Uniphase MAPA+2370100FA is a single-mode optical attenuator module for precision signal attenuation in fiber-optic networks and test environments. This IA3 configuration integrates into the JDS Uniphase MAP Series platform, delivering stable, accurate optical power control across a broad wavelength range. The module supports 0 dB to 60 dB attenuation with 0.01 dB resolution, making it suitable for telecommunications, fiber optics testing, network simulation, and research applications.
Technical Specifications
Fiber Type: Single-mode, 9/125 µm
Wavelength Range: 1200 nm to 1700 nm
Attenuation Range: 0 dB to 60 dB
Attenuation Resolution: 0.01 dB
Insertion Loss: 1.5 dB (typical)
Return Loss: 60 dB (typical)
Linearity: ±0.1 dB
Connector Type: FC/APC (all ports)
Port Configuration: Bulkheads
Key Features
Fine-grained attenuation control: 0.01 dB resolution enables precise signal level adjustment across a 60 dB dynamic range.
Wide spectral coverage: 1200 nm to 1700 nm wavelength support accommodates S-, C-, L-, and U-band applications.
Low insertion loss: 1.5 dB typical insertion loss minimizes overall system loss.
High return loss performance: 60 dB typical return loss ensures minimal reflections.
Tight linearity specification: ±0.1 dB linearity provides predictable attenuation behavior across the full operating range.
Modular cassette design: Single attenuator cassette format integrates directly into MAP Series chassis.
Typical Applications
Telecommunications network testing and validation
Fiber optics component characterization
Optical network simulation and emulation
Research and laboratory measurement
Compatibility & Integration The MAPA+2370100FA integrates into JDS Uniphase MAP Series platforms, including the MAP Master Chassis (MAP+2M00) and MAP Benchtop system (MAP+2B00). The single attenuator cassette format fits within standard MAP chassis configurations supporting variable slot capacities.
Specifications
| Parameter | Value |
|---|---|
| Wavelength Range | 1200 nm to 1700 nm |
JDS Uniphase MAPA+2370100FA — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the JDS Uniphase MAPA+2370100FA. Calibration covers attenuation accuracy at 5 or more set values across the full range (0 to rated maximum dB), attenuation linearity, wavelength-dependent attenuation at 1310 nm, 1490 nm, and 1550 nm, insertion loss at minimum attenuation (0 dB position), and polarization-dependent loss (PDL) where applicable. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common JDS Uniphase MAPA+2370100FA faults: motor and gear mechanism wear (attenuation steps or loss of smooth control), optical port contamination, EEPROM calibration data corruption. Most common faults are motor or gear mechanism wear on variable attenuators causing attenuation steps or loss of smooth control, optical port contamination reducing dynamic range, and EEPROM calibration data corruption on digitally controlled models.
JDS Uniphase MAPA+2370100FA price
This JDS Uniphase MAPA+2370100FA is listed at $2,200. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
JDS Uniphase MAPA+2370100FA calibration cost
NIST-traceable calibration for the JDS Uniphase MAPA+2370100FA is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers attenuation accuracy at 5 or more set values across the full range (0 to rated maximum dB), attenuation linearity, wavelength-dependent attenuation at 1310 nm, 1490 nm, and 1550 nm, insertion loss at minimum attenuation (0 dB position), and polarization-dependent loss (PDL) where applicable. Turnaround is 1 to 3 business days after receipt. See full calibration details →
