JDSU HP3-60-P4 Fiber Inspection Handheld Fiberscope HP3 60 Microscope
JDSU/HP Fiber Inspection Microscopes. Model: HP3-60-P4.
- Model
- JDSU/HP HP3-60-P4
- Calibration
- Available on request
- Price
- $880
- Status
- In stock
- RFQ ref
- HP3-60-P4
This unit
The JDSU HP3-60-P4 is a handheld fiberscope that combines fiber optic connector inspection with optical power measurement in a single integrated platform. Field technicians and installers use this device to inspect fiber end faces, measure optical power across multiple wavelengths, and verify signal attenuation - eliminating the need for separate inspection and test instruments and reducing overall inspection cycle time.
Technical Specifications
Display & Magnification- 1.8-inch TFT LCD screen delivers clear, detailed images of fiber end faces
- Optical magnification: 200X, 400X, or 200/400X (dual-magnification probes)
- Horizontal field-of-view: 550 μm @ 200X; 350 μm @ 400X Fiber Inspection
- Integrated patch cord microscope (PCM) eliminates probe tip changes
- Inspects both bulkhead (female) and patch cord (male) connector sides
- Supports single-mode and multimode fiber across LAN, Telecom, CATV, and DWDM applications
- Compatible with JDSU FMAE adapters for multiple connector types Optical Power Measurement
- Measures optical power and attenuation in dBm and dB
- Pre-calibrated wavelengths: 850, 980, 1300, 1310, 1490, 1550, and 1625 nm
- Supports dual-wavelength measurements with saved reference levels (e.g., 850/1300 nm, 1310/1550 nm)
- Automatic wavelength detection when paired with JDSU light source
- Modulation frequency detection capability
- Input range: -50 to +5 dBm; maximum permitted input: +10 dBm
- Linearity: ±0.06 dB across measurement range Interfaces & Connectivity
- 4-pin Hirose input for FBP series probe microscopes
- Universal Push-Pull (UPP) input for 2.5 mm connectors (1.25 mm adapter available for LC and MU connectors) Power & Operational
- Six AA alkaline batteries or AC adapter (100–240 VAC / 9V DC / 500 mA)
- Continuous runtime: approximately 3 hours
- Auto-shutoff: 20 minutes
- Low battery warning indicator
- Three-button operation; hanging hook for hands-free use Physical
- Dimensions: 162 x 114 x 42 mm (6.4 x 4.5 x 1.7 in)
- Weight: 333 g (11.7 oz) with six AA alkaline batteries
Specifications
| Parameter | Value |
|---|---|
| Power Range (dBm) | '-50 to +5 dBm (linearity) |
| +10 dBm maximum input | Voltage / Current Range | 100–240 VAC / 9V DC / 500 mA | Wavelength Range: 1300, 1310, 1490, 1550, 1625 nm, 850, 980 |
JDSU/HP HP3-60-P4 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the JDSU/HP HP3-60-P4. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
JDSU/HP HP3-60-P4 price
This JDSU/HP HP3-60-P4 is listed at $880. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
JDSU/HP HP3-60-P4 calibration cost
NIST-traceable calibration for the JDSU/HP HP3-60-P4 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
