Acromag IP-EP201 JTAG-Reconfigurable Cyclone II FPGA Digital I/O Module
Acromag Digital Input Board. Frequency Range: 250 kHz to 100 MHz, Voltage / Current Range: 5V tolerant TTL I/O.
- Model
- Acromag IP-EP201
- Calibration
- Available on request
- Price
- $300
- Status
- In stock
- RFQ ref
- IP-EP201
This unit
The Acromag IP-EP201 is an Industry Pack (IP) module that delivers 48 TTL bidirectional digital I/O lines through a JTAG-reconfigurable Altera Cyclone II FPGA. Designed for industrial digital interfacing, this module combines user-programmable logic with direct FPGA control and flexible clocking, enabling custom I/O solutions without external interface logic.
Technical Specifications
FPGA Core- Altera Cyclone II EP2C20
- JTAG or IP bus configuration download Digital I/O
- 48 TTL bidirectional I/O lines, 5V tolerant
- LVTTL external clock input connected directly to FPGA global clock pin
- Direction control in 8-channel groups Clocking
- On-board Cypress CY22150 clock synthesizer (or equivalent)
- Frequency range: 250 kHz to 100 MHz
- IP bus clock support: 8 MHz and 32 MHz IP Bus Interface
- ANSI/VITA 4-1995 compliant
- 8 or 16-bit I/O space data width
- 8-bit ID space
- Access time (8 MHz): 1 wait state, 375 nS cycle
- Two interrupt request levels
- Wired DMA support (not enabled in example firmware) Power-Up & Configuration
- On-board CPLD manages boot and FPGA download
- FPGA assumes full IP bus control post-configuration Environmental
- Operating temperature: 0 to 70°C (standard); -40 to 85°C (IP-EP201E extended range)
- Storage temperature: -55 to 125°C
- Humidity: 5 to 95% non-condensing
Key Features
- User-programmable logic via Altera Quartus II tools and VHDL
- Rapid I/O reconfiguration without hardware redesign
- Global clock distribution for timing-critical applications
- Independent channel direction control enables mixed input/output configurations
Typical Applications Digital signal acquisition, real-time control interfaces, test automation, industrial protocol bridging, and custom instrumentation requiring flexible I/O expansion.
Compatibility & Integration Engineering Design Kit includes schematics, parts list, and example VHDL code. Requires VHDL expertise and Altera Quartus II development environment.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 250 kHz to 100 MHz | Voltage / Current Range: 5V tolerant TTL I/O |