Abaco Systems / VMIC VMIVME-1182-030 Digital Input Module
The VMIVME-1182-030 is a Digital Input Module by Abaco Systems / VMIC.
- Model
- Abaco Systems / VMIC VMIVME-1182-030
- Calibration
- Available on request
- Price
- $1,399
- Status
- In stock
- RFQ ref
- VMIVME-1182-030
This unit
The Abaco Systems / VMIC VMIVME-1182-030 is a VMEbus-compatible digital input module delivering 64 optically isolated channels for event detection, pulse counting, and time-tagged data logging. The module detects changes of state, monitors event sequences, and accumulates pulse counts across all channels with configurable debounce filtering and programmable interrupt generation.
Technical Specifications
Channel Configuration- 64 digital input channels
- Optical isolation between channels and to VMEbus
- Channel-to-channel isolation: 1,500 VDC or 1,100 VRMS
- Channel-to-VMEbus isolation: 1,500 VDC or 1,100 VRMS Input Voltage Ranges
- 5 to 60 VDC
- 110 to 240 VAC
- Configurable for voltage sensing or contact sensing Change-of-State (COS) Detection
- Software-controlled per channel
- Detection modes: disabled, rising edge, falling edge, or any edge
- Minimum state duration: 2 ms
- Minimum detectable pulse width: 2 ms
- Minimum signal period: 4 ms Sequence of Events (SOE) Monitoring
- Dual-buffer architecture for simultaneous processing and loading
- Time-tagged event storage with 1.0 ms resolution
- Relative timer range: 0 to 65,535 ms (resettable from VMEbus) Pulse Accumulation
- 64 Pulse Accumulation Count (PAC) registers
- Maximum count per channel: 65,535 pulses
- Edge recognition on both rising and falling transitions
- Overflow flag or optional interrupt notification Debounce Control
- Software-programmable per channel
- Debounce range: 1.25 ms to 1.024 s Interrupt Capabilities
- COS-triggered interrupt generation
- User-selectable interrupt levels
- Single-byte vector output during acknowledge cycle
Key Features
- Onboard buffer for time-tagged event data enables forensic analysis of input sequences
- Per-channel debounce eliminates spurious signal noise
- Dual SOE buffers allow continuous event capture during data retrieval
- Programmable interrupts reduce processor polling overhead
Typical Applications
- Industrial control and supervisory monitoring
- Power system event recording and disturbance analysis
- Process automation with multi-channel state tracking
- Real-time fault detection and sequence logging
Compatibility & Integration VMEbus-compatible architecture supports standard VME crate installations. Module integrates with existing VME-based control systems requiring distributed digital input acquisition with timing precision.
Specifications
| Parameter | Value |
|---|---|
| Voltage / Current Range | 110 to 240 VAC, 5 to 60 VDC |
Abaco Systems / VMIC VMIVME-1182-030 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Abaco Systems / VMIC VMIVME-1182-030. Calibration covers per-channel threshold accuracy, input leakage current, logic level high/low margins, and signal timing verification. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Abaco Systems / VMIC VMIVME-1182-030 faults: ESD-damaged input protection, failed driver ICs, connector pin damage. Most failures involve ESD-damaged input protection circuitry, failed logic driver ICs, or mechanical connector pin damage. Board-level component replacement is standard practice.
Abaco Systems / VMIC VMIVME-1182-030 price
This Abaco Systems / VMIC VMIVME-1182-030 is listed at $1,399. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Abaco Systems / VMIC VMIVME-1182-030 calibration cost
NIST-traceable calibration for the Abaco Systems / VMIC VMIVME-1182-030 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers per-channel threshold accuracy, input leakage current, logic level high/low margins, and signal timing verification. Turnaround is 1 to 3 business days after receipt. See full calibration details →
