ISO-Tech IPS-606D

The ISO-Tech IPS-606D is a single-output, 360W switching DC power supply engineered for electronic testing, development, and laboratory environments. It delivers continuously adjustable output voltage from 0 to 60V and current from 0 to 6A, with dual 3½-digit LED displays (green for voltage, red for current) providing simultaneous real-time monitoring. The unit operates in constant voltage and constant current modes with automatic crossover based on load conditions, maintaining exceptional regulation through line and load stability specifications. Remote output control and sensing capabilities enable precise distributed power management across test benches and development stations.

Technical Specifications Power and Input

Output Power: 360W

Output Voltage: 0–60V continuously adjustable

Output Current: 0–6A continuously adjustable

Input Voltage: 115V / 230V ±15%, 50/60Hz (switch selectable) Voltage Regulation (CV Mode)

Line Regulation: ≤5mV

Load Regulation: ≤5mV

Ripple & Noise: ≤5mVrms, ≤100mVp-p (20MHz bandwidth)

Temperature Coefficient: ≤100ppm/°C

Recovery Time: ≤500µs (50% load change, minimum 0.5A load) Current Regulation (CC Mode)

Line Regulation: ≤3mA

Load Regulation: ≤3mA

Ripple & Noise: ≤3mArms Display and Measurement

Dual LED Displays: 3½ digit resolution

Accuracy: ±(0.5% of reading + 2 digits) voltage and current Environmental

Operating Temperature: 0°C to +40°C

Storage Temperature: −10°C to +70°C

Operating Humidity: <80%

Altitude: Up to 2000m

Key Features

Dual-mode operation with automatic CV/CC crossover

Over-voltage protection (OVP) for load safety

Remote ON/OFF output control via external terminals

Remote sensing for cable-loss compensation

Compact form factor: 128mm (W) × 145mm (H) × 285mm (D), 3.2kg

Typical Applications

Component and subsystem functional testing

Circuit development and prototype validation

Burn-in and stress testing procedures

Bench-top laboratory power requirements

Compatibility & Integration Supports external control via remote ON/OFF terminals and remote sensing inputs for distributed or automated test setups. Includes user manual, power cord, and GTL-203A test leads.