Curtiss-Wright / ACRA Control KAD/EBM/101/B/00 1-Channel Ethernet Bus Monitor Parser Module - Conformal Coated
The Curtiss-Wright/ACRA Control KAD/EBM/101/B/00 is a 1-channel Ethernet bus monitor parser module, conformal coated for enhanced durability. It enables efficient monitoring and parsing of Ethernet bus traffic in harsh environments.
- Model
- Curtiss-Wright / ACRA Control KAD/EBM/101/B/00
- Calibration
- Available on request
- Price
- $2,100
- Status
- In stock
- RFQ ref
- KAD/EBM/101/B/00
This unit
The Curtiss-Wright/ACRA Control KAD/EBM/101/B/00 is a single-channel Ethernet bus monitor parser module that captures and analyzes Fast Ethernet traffic within the ACRA KAM-500 modular system. Operating on 100BaseTX IEEE 802.3u standard interfaces, the module parses Ethernet traffic at the IP layer and distributes processed data to other KAM-500 modules. Conformal coating enhances durability in harsh operational environments. The module consumes 1.03–1.85 W total power and weighs 75 g.
Technical Specifications
Ethernet Interface: Single 100BaseTX IEEE 802.3u compliant channel over 100 Ω CAT5 UTP cable
Link Negotiation: Auto-negotiation supported for full/half-duplex modes
Parsing Layer: IP-layer traffic parsing and flow identification
Classification Capacity: Up to 254 unique flows identified using 8 × 16-bit frame field selectors
Classification Fields: MAC addresses, IP addresses, IP length, protocol type (UDP/TCP), port numbers
Identification Method: Parameter-based with optional field masking
Counters: Valid and error frame counters with packet count tagging
Timestamps: Per-flow timestamp tagging
Error Detection: Ethernet and IP layer error detection
Promiscuous Mode: Optional support for observing all link traffic
Management Traffic: ARP and ICMP-PING excluded by default; selectable via parser slot 254
Power Consumption: 1.03–1.85 W
Mass: 75 g (2.65 oz)
Conformal Coating: Yes
Key Features
Single-channel 100BaseTX input with auto-negotiation
Flexible traffic classification across 8 selectable 16-bit frame fields
Supports up to 254 concurrent flow identifications
Integrated frame error and IP layer error detection
Optional promiscuous mode for complete link monitoring
Conformal coating for enhanced environmental durability
System Integration Designed for deployment in any user-slot within the ACRA KAM-500 system. Multiple KAD/EBM/101 modules may be placed in any combination. Parsed traffic data distributes to other KAM-500 modules for further processing.
Curtiss-Wright / ACRA Control KAD/EBM/101/B/00 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Curtiss-Wright / ACRA Control KAD/EBM/101/B/00. Calibration covers analog input channel accuracy and offset at all gain settings, analog output accuracy, digital I/O logic threshold verification, sample rate and timing accuracy, and trigger and synchronization bus functional verification. NI CompactRIO and PXI chassis also undergo backplane trigger line integrity check.. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Curtiss-Wright / ACRA Control KAD/EBM/101/B/00 faults: power supply failure (cRIO-9073/9074), C-series slot connector wear, PXI chassis fan failure, GPIB interface failure on VXI controllers, BIOS/EEPROM corruption. NI CompactRIO most common faults are power supply failure on older cRIO-9073/9074 chassis and C-series module slot connector wear from repeated hot-swap cycles. PXI chassis fan failure is the most common wear item — chassis fans are field-replaceable. VXI embedded controllers most commonly develop EEPROM corruption and GPIB interface failure.
Curtiss-Wright / ACRA Control KAD/EBM/101/B/00 price
This Curtiss-Wright / ACRA Control KAD/EBM/101/B/00 is listed at $2,100. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Curtiss-Wright / ACRA Control KAD/EBM/101/B/00 calibration cost
NIST-traceable calibration for the Curtiss-Wright / ACRA Control KAD/EBM/101/B/00 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers analog input channel accuracy and offset at all gain settings, analog output accuracy, digital I/O logic threshold verification, sample rate and timing accuracy, and trigger and synchronization bus functional verification. NI CompactRIO and PXI chassis also undergo backplane trigger line integrity check.. Turnaround is 1 to 3 business days after receipt. See full calibration details →
