Keithley KPCI-3102 Low Gain Analog I/O Board
Keithley Data Acquisition Systems (DAQ). Channel: gain queue for non-sequential channel sampling wit.
- Model
- Keithley KPCI-3102
- Calibration
- Available on request
- Price
- $450
- Status
- In stock
- RFQ ref
- KPCI-3102
This unit
The Keithley KPCI-3102 is a PCI-bus data acquisition board engineered for low-gain analog input and output applications in test, measurement, process control, and automation systems. It delivers 12-bit analog input resolution at up to 225 kS/s throughput, configurable 16 single-ended or 8 differential input channels, 2 analog outputs with 16-bit resolution, 23 digital I/O lines, and 4 counter/timer channels.
Technical Specifications Analog Input
16 single-ended or 8 differential channels
12-bit resolution
Configurable ranges: ±1.25 V, ±2.5 V, ±5 V, ±10 V (bipolar); 0–1.25 V, 0–2.5 V, 0–5 V, 0–10 V (unipolar)
Gain settings: 1, 2, 4, 8
Throughput: 225 kS/s maximum
1024-location channel-gain queue for non-sequential channel sampling with different gains
Continuous paced and triggered acquisition modes
Pre-trigger, post-trigger, and about-trigger support with external trigger capability
Amp Low connection for pseudo-differential input referencing Analog Output
2 channels, 16-bit resolution
Output ranges: ±5 V, ±10 V, 0–5 V, 0–10 V
Outputs initialize to 0 V at power-up Digital I/O
23 total lines: two 8-bit ports (A, B) and one 7-bit port (C)
Ports A and B combinable into a virtual 16-line port
Scanning to 3 MHz
Digital output drive: 12 mA sink, 15 mA source Counter/Timers
4 channels, 16-bit resolution
Event counting, one-shot/frequency output, frequency measurement
Internal and external cascading support
Key Features
68-pin Amp connector for I/O
Software-configurable input ranges and gains
Manual and automatic calibration utilities
Bundled 32-bit DriverLINX drivers, TestPoint, LabVIEW VIs, ExceLINX, VisualSCOPE
Typical Applications Data acquisition, industrial control, sensor signal conditioning, frequency measurement, and multi-channel signal routing in laboratory and field deployments.
Compatibility & Integration PCI-bus interface. Operating temperature: 0°C to 70°C. Storage temperature: –25°C to 85°C. Relative humidity: up to 95% non-condensing. Board dimensions: 8.5 inches × 4.2 inches.
Specifications
| Parameter | Value |
|---|---|
| Voltage / Current Range | ±1.25 V, ±10 V, ±10 V (input bipolar) |
Keithley KPCI-3102 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Keithley KPCI-3102. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Keithley KPCI-3102 price
This Keithley KPCI-3102 is listed at $450. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Keithley KPCI-3102 calibration cost
NIST-traceable calibration for the Keithley KPCI-3102 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
